2025
- International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Properties, Fabrication and Applications (THERMEC’2025) @ University of Tours, Tours, France, June 30-July 4, 2025
- “Development of Advanced Magnesium Alloys”
Yoshihito Kawamura - “Development of Mg-Zn-Y Alloys with High Thermal-Conductivity and Mechanical Strength”
Yunsheng Wang, Shinichi Inoue, Yoshihito Kawamura - “Combined 3DATP and HADDF studies of the microstructures of new generation magnesium alloys developed at Magnesium Research Centre, Kumamoto “
Kamanio Chattopadhyay, Sureandra Kumar Makineni, Dipanjan Kumar, Hemant Kumar - “Orientation dependence of deformation behavior in tensile test of pure magnesium single crystals”
Shinji Ando, Hiromoto Kitahara - “Numerical Evaluation of Kink Band Formation in Anisotropic Solids”
Tsuyoshi Mayama - “Processing Strategies for Tailoring Strength and Ductility in Mg-Y-Zn Alloy”
Drahomir Dvorsky, Schin-Ichi Inoue, Soya Nishimoto, Ayami Yoshida, J. Kubisek, L. Heller, Esther De Prado, Jan Duchov, Miroslav Ceavojsky, Dalibor Vojtech, Yoshihito Kawamura - “Novel prospective in design of Mg alloys for implantology: in vitro and in vivo assessment of degradation of Mg-Zn-Ca-Y-Mn alloys”
Anna Dobkowska, Diana Martinez, Shinichi Inoue, Yoshihito Kawamura, Wojciech Swieszkowski - The 20th International Conference on Strength of Materials (ICSMA20) @ Kyoto International Conference Center, Kyoto, Japan, June 2nd – 6th, 2025
“Structural and Dynamical Properties of Mg-Zn-Y Alloys During Rapid Cooling: A Combined First-Principlesand Machine-Learning Potential Study”
Takao Tsumuraya, Kohei Shimamura, Soya Nishimoto, Akihide Koura, Fuyuki Shimojo, Yoshihito Kawamura - (Invited) “Strengthening in cold-reduced steel sheet via low-angle grain boundary engineering”
Shigeaki Kobayashi, Takayuki Satake, Sadahiro Tsurekawa - (Invited) “High strength and large elongation of Mg/LPSO extruded alloys obtained by anisotropic mechanical property-induced ductilization (AMID) mechanism”
Koji Hagihara, Tsuyoshi Mayama, Michiaki Yamasaki, Toko Tokunaga, Soya Nishimoto - (Invited) “Various deformation modes observed during tensile and compressive deformation in LPSO-type Mg alloys with multimodal microstructures”
Michiaki Yamasaki, Kosho Horiguchi, Soya Nishimoto, Koji Hagihara, Toko Tokunaga, Stefanus Harjo, Wu Gong - “High strength and fracture-resistant Mg-Y-Zn extruded alloys with LPSO phase”
Soya Nishimoto, Koji Hagihara, Michiaki Yamasaki - “Possibility of controlling work hardening rate by deformation incompatibility between grains”
Yoshiki Kawano, Masatoshi Mitsuhara, Tsuyoshi Mayama - “Crystal Orientation Dependence of Deformation Behavior in Pure Magnesium Single Crystals Evaluated by Ball Indentation Testing”
Hiromoto Kitahara , Ryu Ohkubo, Shinji Ando - (Poster session)
“First-principles study of the crystal structure prediction and stacking fault energies in basal and second-order pyramidal slip systems of Mg-Y alloys”
Eiki Kosakamoto, Takao Tsumuraya, Shinji Ando - “Studies on tensile deformation behavior of extruded Mg97Y2Zn1 alloys by in-situ neutron diffraction and acoustic emission measurement”
Kosho Horiguchi, Soya Nishimoto, Stefanus Harjo, Wu Gong, Daria Drozdenko, Koji Hagihara, Toko Tokunaga, Michiaki Yamasaki - “Micro-mechanical characterization of hydrogen enhanced ductility loss of precipitation-hardened austenitic steel”
Shogo Momono, Kwangsik Kwak, Yoji Mine, Katsuhiko Oishi