2023

  • Stefanus Harjo, Wu Gong, Kazuya Aizawa, Takuro Kawasaki, Michiaki Yamasaki, Tsuyoshi Mayama, Yoshihito Kawamura,
    “Effect of Extrusion Ratio in Hot-Extrusion on Kink Deformation during Compressive Deformation in an αMg/LPSO Dual-Phase Magnesium Alloy Monitored by In Situ Neutron Diffraction”, In-Press.
    https://doi.org/10.2320/matertrans.MT-MD2022004
  • Wu Gong, Takuro Kawasaki, Ruixiao Zheng, Tsuyoshi Mayama, Binxuan Sun, Kazuya Aizawa, Stefanus Harjo, Nobuhiro Tsuji,
    “Compressive deformation behavior of AZ31 alloy at 21K: an in-situ neutron diffraction study”, Scripta Materialia, 225 (2023) 115161.
    https://doi.org/10.1016/j.scriptamat.2022.115161

2022

  • Yoshihito Kawamura, Hayato Yamagata, Shin-ichi Inoue, Takanori Kiguchi, Kamanio Chattopadhyay.
    “Kink Bands and Strengthening of Millefeuille-Structured Magnesium Alloys by Cluster Arranged Nanoplates (CANaPs): The Case of Mg-0.4Zn-1.0Y Alloy”,
    Journal of Alloys and Compounds. 939 (2022) 168607-1-168607-9
    https://doi.org/10.1016/j.jallcom.2022.168607
  • Shin-ichi Inoue, Kakeru Ishiage, Yoshihito Kawamura.
    “Optimization of heat treatment condition of nonflammable Mg-Al-Ca alloys with high thermal conductivity” Journal of Alloys and Compounds (2022) 934. 10. 168014-168014
    https://doi.org/10.1016/j.jallcom.2022.168014
  • Toko Tokunaga, Koji Hagihara, Michiaki Yamasaki, Tsuyoshi Mayama, Kazuki Yamamoto, Hiroki Narimoto, Taiki Kida, Yoshihito Kawamura & Takayoshi Nakano,
    “Kink-band formation in the directionally-solidified Mg/LPSO two-phase alloys”,
    Science and Technology of Advanced Materials, 23 (2022) 752-766
    https://doi.org/10.1080/14686996.2022.2137696
  • Soya Nishimoto, Michiaki Yamasaki, and Yoshihito Kawamura,
    “The Effects of Pre-Consolidation Heat Treatment on the Tensile and Fracture Toughness Behavior of the Rapidly Solidified Mg–Zn–Y–Al Alloys”, Materials Transactions, 63 (2022) 1396-1405.
    https://doi.org/10.2320/matertrans.MT-L2022008
  • Kakeru Ninomiya, Koki Itamoto, Hiroyuki Setoyama, Daisuke Egusa, Eiji Abe, Michiaki Yamasaki, and Maiko Nishibori,
    “Chemical Interactions of Solute Atoms During L12 Cluster Formation in Mg–Zn–Gd Alloys with Long-Period Stacking Ordered Structure”　Journal of Alloys and Compounds, In-Press.
    https://doi.org/10.1016/j.jallcom.2022.167101
  • Takao Tsumuraya, Hiroyoshi Momida, and Tamio Oguchi,
    “Electronic origin of phase stability in Mg-Zn-Y alloys with a long-period stacking order”, Applied Physics Express 15 075506 (2022).
    https://doi.org/10.35848/1882-0786/ac7b68
  • Soya Nishimoto, Michiaki Yamasaki, and Yoshihito Kawamura,
    “Inherited multimodal microstructure evolution of high-fracture-toughness Mg-Zn-Y-Al alloys during extrusion for the consolidation of rapidly solidified ribbons”,
    Journal of Magnesium and Alloys (2022) In-Press.
    https://doi.org/10.1016/j.jma.2022.05.014
  • Michiaki Yamasaki, Zhiminig Shi, Andrej Atrens, Akito Furukawa, Yoshihito Kawamura,
    “Influence of crystallographic orientation and Al alloying on the corrosion behaviour of extruded α-Mg/LPSO two-phase Mg-Zn-Y alloys with multimodal microstructure”,
    Corrosion Science, 63(2) (2022) 118-127.
    https://doi.org/10.1016/j.corsci.2022.110237
  • Yoshiki Kawano, Tsuyoshi Mayama, Taiki Okamoto, Masatoshi Mitsuhara,
    “Numerical prediction of {112¯2}〈112¯3¯〉compression twin activation in commercially pure titanium under uniaxial tension”,
    Materials Science and Engineering: A, 847 (2022) 143133.
    https://doi.org/10.1016/j.msea.2022.143133
  • Yoshiki Kawano, Masatoshi Mitsuhara, Tsuyoshi Mayama, Misaki Deguchi, and Zishuo Song,
    “Local slip activities in polycrystalline α-Ti depending on textures and strain rates”,
    Materials Science and Engineering: A, 847 (2022) 143302.
    https://doi.org/10.1016/j.msea.2022.143302
  • Tsuyoshi Mayama, Sean R. Agnew, Koji Hagihara, Kentaro Kamura, Kazuma Shiraishi, Michiaki Yamasaki, and Yoshihito Kawamura,
    “α-Mg/LPSO (Long-Period Stacking Ordered) phase interfaces as obstacles against dislocation slip in as-cast Mg-Zn-Y alloys”,
    International Journal of Plasticity, 154 (2022) 103294.
    https://doi.org/10.1016/j.ijplas.2022.103294
  • Yoshihito Kawamura, Kazuki Ougi, Shin-ichi Inoue, Takanori Kiguchi, Makoto Takafuji, Hirotaka Ihara, Donald S. Shih,
    “Advanced Mg–Al–Ca Alloys with Combined Properties of High Thermal Conductivity, High Mechanical Strength and Non-Flammability”,　Materials Transactions, 200 110237 (2022).
    https://doi.org/10.2320/matertrans.MT-M2021195
  • Soya Nishimoto, Yuta Koguchi, Michiaki Yamasaki, and Yoshihito Kawamura,
    “Effect of hierarchical multimodal microstructure evolution on tensile properties and fracture toughness of rapidly solidified Mg–Zn–Y–Al alloys with LPSO phase”,
    Materials Science and Engineering: A, 832 (2022) 142348.
    https://doi.org/10.1016/j.msea.2021.142348
  • Kai Guan, Mariko Egami, Daisuke Egusa, Hajime Kimizuka, Michiaki Yamasaki, Yoshihito Kawamura, Eiji Abe,
    “Short-range order clusters in the long-period stacking/order phases with an intrinsic-I type stacking fault in Mg-Co-Y alloys”,
    Scripta Materialia, 207(15) (2022) 114282.
    https://doi.org/10.1016/j.scriptamat.2021.114282

2021

  • Koji Hagihara, Ryohei Ueyama, Toko Tokunaga, Michiaki Yamasaki, Yoshihito Kawamura, Takayoshi Nakano, “Quantitative estimation of kink-band strengthening in an Mg–Zn–Y single crystal with LPSO nanoplates”,　Materials Research Letters, 9(11) 467-474 (2021).
    https://doi.org/10.1080/21663831.2021.1974593
  • Hidetoshi Somekawa, Daisuke Ando, Koji Hagihara, Michiaki Yamasaki, Yoshihito Kawamura, Takayoshi Nakano, “Intrinsic kink bands strengthening induced by several wrought-processes in Mg-Y-Zn alloys containing LPSO phase”,　Materials Characterization, 179 111348 (2021).
    https://doi.org/10.1016/j.matchar.2021.111348
  • Hidetoshi Somekawa, Michiaki Yamasaki, Yoshihito Kawamura, Tadanobu Inoue, “Wrought-procedure memory in caliber rolled Mg-Y-Zn alloy containing LPSO phase”,　Materials Characterization, 175, 111080 (2021).
    https://doi.org/10.1016/j.matchar.2021.111080
  • Hiromoto Kitahara, Michiaki Yamasaki, Masayuki Tsushida, Shiji Ando, Yoshihito Kawamura, “Dynamically Recrystallized Structure and Mechanical Properties of Mg96Zn2Y2 Alloys Deformed by ECAP”,　Materials Transactions, 62(9) 1304-1310 (2021).
    https://doi.org/10.2320/matertrans.L-M2021840
  • Takao Tsumuraya, Ikumu Watanabe, Takahiro Sawaguchi,
    “Origin of phase stability in Fe with long-period stacking order as an intermediate phase in cyclic γ-ε martensitic transformation”, Phys. Rev. Research, 3 033215 (2021).
    https://doi.org/10.1103/PhysRevResearch.3.033215
  • Haruka Miyano, Keisuke Takemoto, Masayuki Tsushida, Hiromoto Kitahara, Shiji Ando, “Evaluation of Non-Basal Slip Activity in Rolled Mg-Li Alloys”,　Materials Transactions, 62(8) 1097-1101 (2021).
    https://doi.org/10.2320/matertrans.L-M2021826
  • Atsuki Yokota, Masafumi Matsushita, Naruhito Geshi, Daiki Yamasaki, Toru Shinmei,
    Michiaki Yamasaki, Yoshihito Kawamura,
    “Formation Process of Long-Period Stacking-Ordered Structures in Mg97Zn1Y2 Alloy Comprising HCP and Cubic Phases Fabricated by High-Pressure High-Temperature Annealing”, Metals 11 (7) 1031 (2021).
    https://doi.org/10.3390/met11071031
  • Yuto Nakasuji, Hidetoshi Somekawa, Motohiro Yuasa, Hiroyuki Miyamoto, Michiaki Yamasaki, Yoshihito Kawamura,
    “Quantitative kink boundaries strengthening effect of Mg-Y-Zn alloy containing LPSO phase”, Materials Letters, 292, 129625, (2021).
    https://doi.org/10.1016/j.matlet.2021.129625
  • Michiaki Yamasaki, Tsuyoshi Mayama, Tsubasa Matsumoto, Koji Hagihara, Daria Drozdenko, Yoshihito Kawamura,
    “Formation of <0001>-rotation-type kink boundary in Mg–Zn–Y alloy with long-period stacking ordered structure”, Materials Science and Engineering A, 819 141466 (2021).
    https://doi.org/10.1016/j.msea.2021.141466
  • Koji Hagihara, Ryohei Ueyama, Michiaki Yamasaki, Yoshihito Kawamura, and Takayoshi Nakano, “Surprising increase in yield stress of Mg single crystal using long-period stacking ordered nanoplates”, Materials Science and Engineering A, 209 116797 (2021).
    https://doi.org/10.1016/j.msea.2020.139679
  • Shin-ichi Inoue, Michiaki Yamasaki, Mitsuru Ohata, Shigeki Kakiuchi, Yoshihito Kawamura, and Hidenori Terasaki,
    “Texture evolution and fracture behavior of friction-stir-welded non-flammable Mg–Al–Ca alloy extrusions”,　Materials Science and Engineering: A 799 140090 (2021).
    https://doi.org/10.1016/j.msea.2020.140090

2020

  • Teruki Tsuchiya, Masahiro Fukuda, Hiroaki Ohfuji, Michiaki Yamasaki, Yoshihito Kawamura, Masafumi Matsushita, “A novel long-period phase in Mg97Yb2Cu1 alloy　Journal of Alloys and Compounds, 844 155972 (2020).
    https://doi.org/10.1016/j.jallcom.2020.155972
  • Kazuma Shiraishi, Tsuyoshi Mayama, Michiaki Yamasaki, Yoshihito Kawamura, “Enhanced non-linearity during unloading by LPSO phase in as-cast Mg-Zn-Y alloys and slip-dominated non-linear unloading mechanism”, Materials Science and Engineering A, 790 139679 (2020).
    https://doi.org/10.1016/j.msea.2020.139679
  • Hidetoshi Somekawa, Daisuke Ando, Michiaki Yamasaki, Yoshihito Kawamura, “Microstructure and mechanical properties of low-temperature wrought-processed Mg–Y–Zn alloy containing LPSO phase”　Materialia, 12 100786 (2020).

    https://doi.org/10.1016/j.mtla.2020.100786

  • Okuda Hiroshi, Michiaki Yamasaki, Yoshihito Kawamura,
    “Structural and diffusional phase transformations in liquid-quenched Mg85Y9Zn6 ribbons below the bifurcation temperature” ACTA MATERIALIA, 194 587-593 (2020).
    https://doi.org/10.1016/j.actamat.2020.05.048
  • Donald Shih and Yoshihito Kawamura,
    “Research activities at the Magnesium Research Center (MRC)”, Impact, 2, 43-45(3), (2020)
    https://doi.org/10.21820/23987073.2020.2.43
  • Koji Hagihara, Takuya Okamoto, Ryohei Ueyama, Michiaki Yamasaki, Yoshihito Kawamura, Takayoshi Nakano,
    “Loading Orientation Dependence of the Formation Behavior of Deformation Kink Bands in the Mg-Based Long-Period Stacking Ordered (LPSO) Phase” Materials Transactions, 61, 821-827 (2020).
    https://doi.org/10.2320/matertrans.MT-MM2019001
  • Kosuke Takagi, Michiaki Yamasaki, Yoji Mine, Kazuki Takashima
    “Temperature dependence of prismatic slip in a single-crystalline long-period stacking ordered Mg-Zn-Y alloy” SCRIPTA MATERIALIA 178, 498-502 (2019).
    https://doi.org/10.1016/j.scriptamat.2019.12.025

2019

  • Koji Hagihara, Michiaki Yamasaki, Yoshihito Kawamura, Takayoshi Nakano,
    “Strengthening of Mg-based long-period stacking ordered (LPSO) phase with deformation kink bands” Materials Science and Engineering: A 763, 138163 (2019).
    https://doi.org/10.1016/j.msea.2019.138163
  • Kosuke Takagi, Tsuyoshi Mayama, Yoji Mine, Yu Lung Chiu, Kazuki Takashima,
    “Extended ductility due to kink band formation and growth under tensile loading in single crystals of Mg-Zn-Y alloy with 18R-LPSO structure” , Journal of Alloys and Compounds, 806, 1384-1393 (2019).

    https://doi.org/10.1016/j.jallcom.2019.07.344

  • Kristian Mathis, Daria Drozdenko, Gergely Nemeth, Stefanus Harjo, Wu Gong, Kazuya Aizawa, Michiaki Yamasaki, Yoshihito Kawamura,
    “In-situ Investigation of the Microstructure Evolution in Long-Period-Stacking-Ordered (LPSO) Magnesium Alloys as a Function of the Temperature” frontier in Materials 6, 270 (2019).

    https://doi.org/10.3389/fmats.2019.00270

  • Kazuha Suzawa, Shin-ichi Inoue, Soya Nishimoto, Michiaki Yamasaki, Yoshihito Kawamura, Seigo Fuchigami, Katsuhito Yoshida, and Nozomu Kawabe,
    “High-strain-rate superplasticity and tensile behavior of fine-grained Mg97Zn1Y2 alloys fabricated by chip/ribbon-consolidation” Materials Science and Engineering: A 764, 138179 (2019).

    https://doi.org/10.1016/j.msea.2019.138179

  • Kenya Yamashita, Michiaki Yamasaki, Yoshihito Kawamura, and Eiji Abe
    “Optimization of mechanical properties of dilute Mg-Zn-Y alloys prepared by rapid solidification” Materials & Design 108, 107984 (2019).

    https://doi.org/10.1016/j.jallcom.2019.02.219

  • Daria Drozdenko, Michiaki Yamasaki, Kristián Máthis, Patrik Dobroň, Pavel Lukáč, Naoya Kizud, Shin-ichi Inoue, and Yoshihito Kawamura,
    “A novel long-period stacking/order structure in Mg-Ni-Y alloys” , Journal of Alloys and Compounds, 788, 277-282 (2019).

    https://doi.org/10.1016/j.jallcom.2019.02.219

  • Tsuyoshi Mayama, Masakazu Tane, and Yuichi Tadano,
    “Superior energy absorption in porous magnesium: Contribution of texture development triggered by intra-granular misorientations”, Acta Materialia, 165, 62-72 (2019).

    https://doi.org/10.1016/j.actamat.2018.11.037

  • Kosuke Hayashi, Masayuki Tsushida, Hiromoto Kitahara and Shinji Ando,
    “Effects of Cerium Addition on Non-basal Slip in Magnesium Single Crystals”, Materials Transactions, 60, 1598-1600 (2019).

    https://doi.org/10.2320/matertrans.L-M2019827

  • Kento Inokuchi, Masayuki Tsushida, Hiromoto Kitahara and Shinji Ando,
    “Effects of Cerium Addition on Fatigue Fracture Behavior of Magnesium Single Crystals”, Materials Transactions, 60, 1601-1604 (2019).

    https://doi.org10.2320/matertrans.L-M2019826

  • Masafumi Matsushita, Kohtaro Masuda, Ryohei Waki, Hiroaki Ohfuji, Michiaki Yamasaki, Yoshihito Kawamura, Yuji Higo,
    “Ultrafine spherulite Mg alloy with high yield strength”, Journal of Alloys and Compounds, 784, 1601-1604 (2019).

    https://doi.org/10.1016/j.jallcom.2019.01.080

  • Shin-ichi Inoue, Michiaki Yamasaki, Yoshihito Kawamura,
    “Oxidation behavior and incombustibility of molten Mg-Zn-Y alloys with Ca and Be addition”, Corrosion Science, 149, 133-143 (2019).

    https://doi.org/10.1016/j.corsci.2018.12.037

  • Masafumi Matsushita, Takafumi Nagata, Jozef Bednarcik, Norimasa Nishiyama, Shoya Kawano, Satoshi Iikubo, Yuji Kubota, Ryo Morishita, Tetsuo Irifune, Michiaki Yamasaki, Yoshihito Kawamura, Masanori Enoki, Hiroshi Ohtani,
    “Key Factor for the Transformation from hcp to 18R-Type Long-Period Stacking Ordered Structure in Mg Alloys”, Materials Transactions, 60, 237-245 (2019)

    https://doi.org/10.2320/matertrans.M2018213

  • 渡邉桃加　北原弘基　高松洋平　津志田雅之　安藤新二
    「マグネシウム合金単結晶の圧痕形成におけるすべりと双晶の役割」,
    日本金属学会誌　2019年 83巻 12号 p. 458-464
    https://doi.org/10.2320/jinstmet.J2019034
  • 井口 健斗, 津志田 雅之, 北原 弘基, 安藤 新二,
    「マグネシウム単結晶の非底面すべりに対するセリウムの影響」,
    軽金属　2019 年69 巻2 号 p. 125-127
    https://doi.org/10.2464/jilm.69.125
  • 林 昂佑, 津志田 雅之, 北原 弘基, 安藤 新二,
    「マグネシウム単結晶の疲労破壊挙動に対するセリウムの影響」,
    軽金属　2019 年69 巻2 号 p. 128-130
    https://doi.org/10.2464/jilm.69.128

2018

2017

  • Okuda H., Yamasaki M., Kawamura Y.
    “Transition to long period stacking ordered structures in Mg85Gd9Zn6 alloys from amorphous ribbons examined by synchrotron radiation scattering: Comparison with Mg85Y9Zn6 alloys” Scripta Materialia 139, 26-29 (2017).
    https://doi.org/10.1016/j.scriptamat.2017.06.013
  • Inoue S.-I., Yamasaki M., Kawamura Y.
    “Formation of an incombustible oxide film on a molten Mg-Al-Ca alloy”, Corrosion Science 122, 118-122 (2017).
    https://doi.org/10.1016/j.corsci.2017.01.026
  • Nishida M., Ishida K., Kodama F., Hayashi K., Akahoshi Y., Hokamoto K., Mayama T., Yamasaki M., Kawamura Y.
    “Lip Formation and Ejecta from LPSO-type Magnesium Alloy Plates in Hypervelocity Impact”, Procedia Engineering 173, 65-72, (2017).
    https://doi.org/10.1016/j.proeng.2016.12.024
  • Hosokawa S., Kimura K., Yamasaki M., Kawamura Y., Yoshida K., Inui M., Tsutsui S., Baron A.Q.R., Kawakita Y., Itoh S.
    “Impurity effects in the microscopic elastic properties of polycrystalline Mg-Zn-Y alloys with a synchronized long-period stacking ordered phase”, Journal of Alloys and Compounds, 695, 426-432, (2017).
    https://doi.org/10.1016/j.jallcom.2016.10.266
  • Hiroaki Rikihisa, Takashi Mori, Masayuki Tsushida, Hiromoto Kitahara and Shinji Ando. Influence of Yttrium Addition on Plastic Deformation of Magnesium Materials Transactions. Vol.58, No.12, 1656-1663 2017.12.1
  • G J Lu, Y Koyanagi, M Tsushida, H Kitahara and S Ando Effect of test frequency on fatigue strength of AZ31 alloy. Journal of Physics: Conf. Series Vol, 841, 012008 (6ページ） 2017.7.1
  • Kazutaka Fukuda, Yuta Koyanagi, Masayuki Tsushida, Hiromoto Kitahara, Tsuyoshi Mayama and Shinji Ando Activation stress for slip systems of pure magnesium single crystals in pure shear test Materials Transactions Vol.58, No.4, 587-594, 2017.4.1
  • Y. Mine, R. Maezono, T. Mayama, J. Wu, Y.L. Chiu, P. Bowen, K. Takashima Plasticity and crack extension in single-crystalline long period stacking ordered structures of Mg85Zn6Y9 alloy under micro-bending　J. Alloys Compd. 718,433‒442　2017.09.25
  • W.S. Chuang, C.H. Hsieh, P.H. Lin, J.C. Huang, K. Takagi, Y. Mine, K. TakashimaRelation between sample size and deformation mechanism in Mg-Zn-Y 18R-LPSO single crystals Intermetallics 91, 110–119 2017.12
  • S. Hosokawa, K. Kimura, J.R. Stellhorn, K. Yoshida, K. Hagihara, H. Izuno, M. Yamasaki, Y. Kawamura, Y. Mine, K. Takashima, H. Uchiyama, S. Tsutsui, A. Koura, F. Shimojo Phonon excitations in a single crystal Mg85Zn6Y9 with a synchronized long-period stacking ordered phase. Acta Mater. in press 2018
  • W. Xu, K. Yagoshi, Y. Koga, M. Sasaki, T. Niidome Optimized polymer coating for magnesium alloy-based bioresorbable scaffolds for long-lasting drug release and corrosion resistance Colloids Surf. B 163, 100-106 2017 Dec 19
  • S. Inoue, M. Yamasaki, Y. Kawamura.　Formation of an incombustible oxide film on a molten Mg-Al-Ca alloy corrosion science 122 pp.118-122 2018
  • Horváth K., Drozdenko D., Garcés G., Dobroň P., Máthis K. Characterization of the acoustic emission response and mechanical properties of Mg alloy with LPSO phase　Materials Science Forum 879,762-766 2017
  • Horváth K., Drozdenko D., Daniš S., Garcés G., Máthis K., Kim S., Dobroň P.　Characterization of Microstructure and Mechanical Properties of Mg-Y-Zn Alloys with Respect to Different Content of LPSO Phase　Advanced Engineering Materials　2017
  • M. Zemková, D. Drozdenko, J. Bohlen, P. Minárik Characterization of microstructure and mechanical properties of magnesium alloys with Neodymium and Yttrium processed by extrusion　METAL 2017
  • D. Drozdenko J. Bohlen, S. Yi, P. Dobroň Effect of thermo-mechanical treatment of extruded Z1 Mg alloy on resulting mechanical properties Magnesium Technology 2017　619-624
  • K. Horváth, D. Drozdenko, G. Garcés, K. Máthis, P. Dobroň Effect of Extrusion ration on microstructure and resulting mechanical properties of Mg alloys with LPSO phase　Proceedings: Magnesium Technology 2017 29-34
  • K. Máthis, G. Garcés, K. Horváth, D. Drozdenko, P. Dobroň In-situ investigation of deformation Mechanisms in Mg-Zn-Y Magnesium Alloys with LPSO phase by diffraction Methods and Acoustic emission Proceedings: Magnesium Technology 2017　625-629
  • P. Dobroň, D. Drozdenko, S. Yi, J. Bohlen An Acoustic Emission study of Deformation behavior of wrought Mg alloys Proceedings: Magnesium Technology 2017 613-618
  • K. Horváth, D. Drozdenko, S. Daniš, G. Garcés, K. Máthis, S. Kim, P. Dobroň　Characterization of Microstructure and Mechanical Properties of Mg-Y-Zn Alloys with Respect to Different Content of LPSO Phase 　full paper// Adv. Eng. Mater. 1700396 (1-6) Jan-18
  • 薬剤溶出性ステントと生体吸収性ステントの臨床での現状 生体吸収性材料の開発と安全性評価 技術情報協会 Dec-17
  • Minami A., Sakamoto H., Marumo Y.　Deep drawing formability of the measurement of magnesium sheet metals WIT Transactions on Engineering Sciences 118,　1-10,2017
  • 力久弘章, 森貴志, 津志田雅之,北原弘基,安藤新二 マグネシウムの塑性変形に対するイットリウム添加の影響 日本金属学会誌 81巻，10号，458-466 2017.10.1

2016

  • Okayasu, M., Takeuchi, S., Matsushita, M., Tada, N., Yamasaki, M., Kawamura, Y., Mechanical properties and failure characteristics of cast and extruded Mg97Y2Zn1 alloys with LPSO phase, Materials Science and Engineering A, 652, pp. 14-29, 2016
  • Higashi, Y., Iwamoto, C., Kawamura, Y., Microstructure evolution and mechanical properties of extruded Mg96Zn2Y2 alloy joints with ultrasonic spot welding, Materials Science and Engineering A, 651, pp. 925-934, 2016.
  • Hagihara, K., Mayama, T, Honnami, M., Yamasaki, M., Izuno, H., Okamoto, T., Ohashi, T., Nakano, T., Kawamura, Y., Orientation dependence of the deformation kink band formation behavior in Zn single crystal, International Journal of Plasticity, 77, pp. 174-191, 2016.
  • Mine, Y., Koga, K., Kraft, O., Takashima, K., Mechanical characterisation of hydrogen-induced quasi-cleavage in a metastable austenitic steel using micro-tensile, Scripta Materialia, 113, pp. 176-179, 2016.
  • Okuda, H., Tanaka, H., Shiratake, T., Yamasaki, M., Kawamura, Y. Development of microstructures in rapidly-quenched Mg85Y9Zn6 alloy ribbons during heating at a constant speed examined by simultaneous small- and wide angle scattering measurements. Acta Materialia 118, pp. 95-99
  • Shiraishi, K., Mayama, T., Yamasaki, M., Kawamura, Y. Strain-hardening behavior and microstructure development in polycrystalline as-cast Mg-Zn-Y alloys with LPSO phase subjected to cyclic loading. Materials Science and Engineering A 672, pp. 49-58
  • Matsushita, M., Inugai, R., Yamasaki, M., Shinmei, T., Kawamura, Y., Irifune, T., Fujita, N., Abe, E. A long-period superlattice phase in Mg97Zn1Yb2 alloys synthesized under high-pressure. Scripta Materialia 121, pp. 45-49.
  • Hagihara, K., Okamoto, T., Yamasaki, M., Kawamura, Y., Nakano, T. Electron backscatter diffraction pattern analysis of the deformation band formed in the Mg-based long-period stacking ordered phase. Scripta Materialia 117, pp. 32-36.
  • Hagihara, K., Okamoto, T., Izuno, H., Yamasaki, M., Matsushita, M., Nakano, T., Kawamura, Y. Plastic deformation behavior of 10H-type synchronized LPSO phase in a Mg-Zn-Y system. Acta Materialia 109, pp. 90-102.
  • Ruan, L., Ezaki, S., Masahiro, F., Shen, S., Kawamura, Y. Forming of magnesium alloy by underwater shock wave. Journal of Magnesium and Alloys 4(1), pp. 27-29.
  • Hagihara, K., Mayama, T., Honnami, M., (…), Nakano, T., Kawamura, Y. Orientation dependence of the deformation kink band formation behavior in Zn single crystal. International Journal of Plasticity 77, pp. 174-191
  • Okayasu, M., Takeuchi, S., Matsushita, M., Tada, N., Yamasaki, M., Kawamura, Y. Mechanical properties and failure characteristics of cast and extruded Mg97Y2Zn1 alloys with LPSO phase. Materials Science and Engineering A 652, pp. 14-29.
  • Kitahara, H., Matsushita, S., Tsushida, M., Ando, S., Tsuji, N. Fatigue properties of ARB-processed Ti sheets with crystallographic texture. International Journal of Fatigue
    92, pp. 18-24.
  • Kitahara, H., Tsushida, M., Ando, S. Orientation dependence of bending deformation behavior in magnesium single crystals. Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals 80(1), pp. 102-107.
  • Kitahara, H., Tsushida, M., Ando, S. Orientation dependence of bending deformation behavior in magnesium single crystals. Materials Transactions 57(8), pp. 1246-1251.
  • Fukuda, K., Koyanagi, Y., Tsushida, M., Kitahara, H., Mayama, T., Ando, S. Activation stress for slip systems of pure magnesium single crystals in pure shear test.
    Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals 80(5), pp. 334-33
  • Song, S.W., Kwon, Y.J., Lee, T., Lee, C.S. Effect of Al addition on low-cycle fatigue properties of hydrogen-charged high-Mn TWIP steels. Materials Science and Engineering A 677, pp. 421-430.
  • Won, J.W., Lee, T., Hong, S.-G., Lee, Y., Lee, J.H., Lee, C.S. Role of deformation twins in static recrystallization kinetics of high-purity alpha titanium. Metals and Materials International 22(6), pp. 1041-1048
  • Wolff, S., Lee, T., Faierson, E., Ehmann, K., Cao, J. Anisotropic properties of directed energy deposition (DED)-processed Ti–6Al–4V. Journal of Manufacturing Processes
    24, pp. 397-405.
  • Lee, J., Lee, T., Kwon, Y.J., Mun, D.-J., Yoo, J.-Y., Lee, C.S. Effects of vanadium carbides on hydrogen embrittlement of tempered martensitic steel. Metals and Materials International 22(3), pp. 364-372
  • Kubota, A., Nagae, S., Touge, M.. Improvement of material removal rate of single-crystal diamond by polishing using H2O2 solution. Diamond and Related Materials 70, pp. 39-45.
  • Kubota, A., Motoyama, S., Touge, M. Surface smoothing of a polycrystalline diamond using an iron plate-H2O2 chemical reaction. Diamond and Related Materials 69, pp. 96-101.
  • Kubota, A., Motoyama, S., Touge, M. Development of an Ultra-finishing technique for single-crystal diamond substrate utilizing an iron tool in H2O2 solution. Diamond and Related Materials 64, pp. 177-183
  • Goto, K., Izumi, Y., Sakamoto, T., Kubota, A., Touge, M. Cutting performance of PCD tools improved by ultraviolet-ray irradiation polishing. Materials Science Forum
    874, pp. 109-114
  • Kwak, K., Mayama, T., Mine, Y., Takashima, K. Anisotropy of strength and plasticity in lath martensite steel . “Materials Science and Engineering A 674, pp. 104-116”
  • Shiraishi, K., Mayama, T., Yamasaki, M., Kawamura, Y. Strain-hardening behavior and microstructure development in polycrystalline as-cast Mg-Zn-Y alloys with LPSO phase subjected to cyclic loading “Materials Science and Engineering A 672, pp. 49-58
  • Hagihara, K., Mayama, T., Honnami, M., Yamasaki, M., Izuno, H., Okamoto, T., Ohashi, T., Nakano, T., Kawamura, Y. Orientation dependence of the deformation kink band formation behavior in Zn single crystal “International Journal of Plasticity
    77, pp. 174-191 “
  • Kwak, K., Mayama, T., Mine, Y., Takashima, K. Micro-tensile behaviour of low-alloy steel with bainite/martensite microstructure “ISIJ International 56(12), pp. 2313-2319”
  • Kwak, K., Mayama, T., Mine, Y., Takashima, K. Micro-tensile behaviour of low alloy steel with bainite/martensite microstructure “Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan 102(6), pp. 304-310 “
  • Fukuda, K., Koyanagi, Y., Tsushida, M., Kitahara, H., Mayama, T., Ando, S. Activation stress for slip systems of pure magnesium single crystals in pure shear test “Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals 80(5), pp. 334-339 “
  • Morita, S., Fujiwara, S., Hori, T., Hattori, N., Somekawa, H., Mayama, T. Microstructure dependence of fatigue crack propagation behavior in wrought magnesium alloy “Frattura ed Integrita Strutturale 10(35), pp. 82-87 “
  • Matsuda, M., Sago, R., Akamine, K., Tsurekawa, S., Takashima, K., Nishida, M.Enhancement of ductility in Fe-Co based alloys by substitution of Pd. ” Journal of Alloys and Compounds 682, pp. 124-131 “
  • Kwak, K., Mayama, T., Mine, Y., Takashima, K. Anisotropy of strength and plasticity in lath martensite steel “Materials Science and Engineering A 674, pp. 104-116”
  • Mine, Y., Koga, K., Takashima, K., Horita, Z. Mechanical characterisation of microstructural evolution in 304 stainless steel subjected to high-pressure torsion with and without hydrogen pre-charging. “Materials Science and Engineering A
    661, pp. 87-95 “
  • Kwak, K., Mayama, T., Mine, Y., Takashima, K. Micro-tensile behaviour of low-alloy steel with bainite/martensite microstructure “ISIJ International 56(12), pp. 2313-2319”
  • Matsuda, M., Mitsuhara, M., Takashima, K., Nishida, M. Antiphase boundary-like structure of B19 martensite in Ti-Ni-Pd shape memory alloy ” Materials Transactions
    57(3), pp. 250-256 “
  • Ito, T., Mine, Y., Otsu, M., Takashima, K. Strain measurement of micrometre-sized structures under tensile loading by using scanning white-light interferometry “Materials Transactions 57(8), pp. 1252-1256”
  • Mine, Y., Koga, K., Kraft, O., Takashima, K. Mechanical characterisation of hydrogen-induced quasi-cleavage in a metastable austenitic steel using micro-tensile testing “Scripta Materialia 113, pp. 176-179 “
  • Kwak, K., Mayama, T., Mine, Y., Takashima, K. Micro-tensile behaviour of low alloy steel with bainite/martensite microstructure “Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan 102(6), pp. 304-310 “
  • Ito, T., Mine, Y., Otsu, M., Takashima, K. Strain measurement of micrometre-sized structures under tensile loading by using scanning white-light interferometry “Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals 80(1), pp. 22-26 “
  • Ogata, S., Mine, Y., Takashima, K., Ohmura, T., Shuto, H., Yokoi, T. Quantification of large deformation with punching in dual phase steel and change of its’ microstructure – Part III: Micro-tensile behavior of pre-strained dual-phase steel “Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan 102(5), pp. 260-267”
  • Mine, Y., Haraguchi, D., Ideguchi, T., Horita, N., Horita, Z., Takashima, K. Hydrogen embrittlement of ultrafine-grained austenitic stainless steels processed by high-pressure torsion at moderate temperature “ISIJ International 56(6), pp. 1083-1090”
  • Ogata, S., Mine, Y., Takashima, K., Ohmura, T., Shuto, H., Yokoi, T. Quantification of large deformation with punching in dual phase steel and change of its microstructure – Part III: Micro-tensile behavior of pre-strained dual-phase steel “ISIJ International
    56(11), pp. 2084-2092”
  • Yokoi, T., Shuto, H., Ikeda, K.-I., Nakada, N., Tsuchiyama, T., Ohmura, T., Mine, Y., Takashima, K. Quantification of large deformation with punching in dual phase steel and change of its’ microstructure – Part I: Proposal of the quantification technique of the punching damage of the dual phase steel “Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan 102(5), pp. 244-252”
  • Yokoi, T., Shuto, H., Ikeda, K.-I., Nakada, N., Tsuchiyama, T., Ohmura, T., Mine, Y., Takashima, K. Quantification of large deformation with punching in dual phase steel and change of its microstructure – Part I: Proposal of the quantification technique of the punching damage of the dual phase steel “ISIJ International 56(11), pp. 2068-2076”
  • Mine, Y., Nakamichi, S., Koga, K., Takashima, K., Kraft, O. Deformation behaviour of nano-twinned single crystals of an Fe–19Cr–16Ni austenitic alloy. “Materials Science and Engineering A 675, pp. 181-191”
  • Kwak, K., Mayama, T., Mine, Y., Takashima, K. Anisotropy of strength and plasticity in lath martensite steel ” Materials Science and Engineering A
    674, pp. 104-116 “
  • Tokuda, M., Mashimo, T., Khandaker, J.I., Ogata, Y., Mine, Y., Hayami, S., Yoshiasa, A.Effect of strong gravitational field on oriented crystalline perovskite-type manganese oxide La1−xSrxMnO3 “Journal of Materials Science 51(17), pp. 7899-7906”
  • Mine, Y., Koga, K., Takashima, K., Horita, Z. Mechanical characterisation of microstructural evolution in 304 stainless steel subjected to high-pressure torsion with and without hydrogen pre-charging “Materials Science and Engineering A 661, pp. 87-95 “
  • Kwak, K., Mayama, T., Mine, Y., Takashima, K. Micro-tensile behaviour of low-alloy steel with bainite/martensite microstructure “ISIJ International 56(12), pp. 2313-2319”
  • Ito, T., Mine, Y., Otsu, M., Takashima, K. Strain measurement of micrometre-sized structures under tensile loading by using scanning white-light interferometry “Materials Transactions 57(8), pp. 1252-1256”
  • Mine, Y., Koga, K., Kraft, O., Takashima, K. Mechanical characterisation of hydrogen-induced quasi-cleavage in a metastable austenitic steel using micro-tensile testing ” Scripta Materialia 113, pp. 176-179 “
  • Kwak, K., Mayama, T., Mine, Y., Takashima, K. Micro-tensile behaviour of low alloy steel with bainite/martensite microstructure “Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan 102(6), pp. 304-310”
  • Ito, T., Mine, Y., Otsu, M., Takashima, K. Strain measurement of micrometre-sized structures under tensile loading by using scanning white-light interferometry “Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals 80(1), pp. 22-26”
  • Yokoi, T., Shuto, H., Ikeda, K.-I., Nakada, N., Tsuchiyama, T., Ohmura, T., Mine, Y., Takashima, K. Quantification of large deformation with punching in dual phase steel and change of its’ microstructure – Part III: Micro-tensile behavior of pre-strained dual-phase steel ” Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
    102(5), pp. 260-267 “
  • Mine, Y., Haraguchi, D., Ideguchi, T., Horita, N., Horita, Z., Takashima, K.Hydrogen embrittlement of ultrafine-grained austenitic stainless steels processed by high-pressure torsion at moderate temperature “ISIJ International 56(6), pp. 1083-1090”
  • Ogata, S., Mine, Y., Takashima, K., Ohmura, T., Shuto, H., Yokoi, T. Quantification of large deformation with punching in dual phase steel and change of its microstructure – Part III: Micro-tensile behavior of pre-strained dual-phase steel “ISIJ International
    56(11), pp. 2084-2092”
  • Yokoi, T., Shuto, H., Ikeda, K.-I., Nakada, N., Tsuchiyama, T., Ohmura, T., Mine, Y., Takashima, K. Quantification of large deformation with punching in dual phase steel and change of its’ microstructure – Part I: Proposal of the quantification technique of the punching damage of the dual phase steel “Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan 102(5), pp. 244-252”
  • Yokoi, T., Shuto, H., Ikeda, K.-I., Nakada, N., Tsuchiyama, T., Ohmura, T., Mine, Y., Takashima, K. Quantification of large deformation with punching in dual phase steel and change of its microstructure – Part I: Proposal of the quantification technique of the punching damage of the dual phase steel “ISIJ International 56(11), pp. 2068-2076 “
  • Nakano, M., Yahiro, K., Yamasaki, E., Kurazono, H., Akada, J., Yamaoka, Y., Niidome, T., Hatakeyama, M., Suzuki, H., Yamamoto, T., Moss, J., Isomoto, H., Hirayama, T.Helicobacter pylori VacA, acting through receptor protein tyrosine phosphatase α, is crucial for CagA phosphorylation in human duodenum carcinoma cell line AZ-521 “DMM Disease Models and Mechanisms 9(12), pp. 1473-1481 “
  • Zeng, X., Hosono, T., Ohta, H., Niidome, T., Shimada, J., Morimura, S.Comparison of microbial communities inside and outside of a denitrification hotspot in confined groundwater “International Biodeterioration and Biodegradation 114, pp. 104-109 ”
    Niidome, T. Drug delivery system controlled by near-infrared light “Kobunshi
    65(8), pp. 420-422”
  • Takebe, Y., Takizaki, M., Tanaka, H., Ohta, H., Niidome, T., Morimura, S.Evaluation of the biogenic amine-production ability of lactic acid bacteria isolated from tofu-misozuke ” Food Science and Technology Research 22(5), pp. 673-678 “
  • Niidome, Y., Haine, A.T., Niidome, T. Anisotropic gold-based nanoparticles: Preparation, properties, and applications “Chemistry Letters 45(5), pp. 488-498”
  • Uemura, T., Yamamuro, M., Kaikita, K., Takashio, S., Utsunomiya, D., Hirakawa, K., Nakayama, M., Sakamoto, K., Yamamoto, E., Tsujita, K., Kojima, S., Hokimoto, S., Yamashita, Y., Ogawa, H. Late gadolinium enhancement on cardiac magnetic resonance predicts coronary vasomotor abnormality and myocardial lactate production in patients with chronic heart failure “Heart and Vessels 31(12), pp. 1969-1979”
  • Akasaka, T., Sueta, D., Arima, Y., Tabata, N., Takashio, S., Izumiya, Y., Yamamoto, E., Yamamuro, M., Tsujita, K., Kojima, S., Kaikita, K., Kajiwara, A., Morita, K., Oniki, K., Saruwatari, J., Nakagawa, K., Ogata, Y., Matsui, K., Hokimoto, S. Association of CYP2C19 variants and epoxyeicosatrienoic acids on patients with microvascular angina “American Journal of Physiology – Heart and Circulatory Physiology 311(6), pp. H1409-H1415 “
  • Akasaka, T., Sueta, D., Arima, Y., Tabata, N., Takashio, S., Izumiya, Y., Yamamoto, E., Yamamuro, M., Tsujita, K., Kojima, S., Kaikita, K., Kajiwara, A., Morita, K., Oniki, K., Saruwatari, J., Nakagawa, K., Ogata, Y., Matsui, K., Hokimoto, S. Association of CYP2C19 variants and epoxyeicosatrienoic acids on patients with microvascular angina “American Journal of Physiology – Heart and Circulatory Physiology 311(6), pp. H1409-H1415 “
  • Tsujita, K., Kaikita, K., Araki, S., Yamada, T., Nagamatsu, S., Yamanaga, K., Sakamoto, K., Kojima, S., Hokimoto, S., Ogawa, H. In Vivo optical coherence tomography visualization of intraplaque neovascularization at the site of coronary vasospasm: A case report BMC Cardiovascular Disorders 16(1),235
  • Yamamura, S., Izumiya, Y., Ishida, T., Onoue, Y., Kimura, Y., Hanatani, S., Araki, S., Fujisue, K., Sueta, D., Kanazawa, H., Takashio, S., Usuku, H., Sugamura, K., Sakamoto, K., Yamamoto, E., Yamamuro, M., Yasuda, H., Kojima, S., Kaikita, K., Hokimoto, S., Ogawa, H., Tsujita, K. Reduced trans-mitral A-wave velocity predicts the presence of wild-type transthyretin amyloidosis in elderly patients with left ventricular hypertrophy “Heart and Vessels pp. 1-6 “
  • Sueta, D., Sugamura, K., Shimizu, H., Shiota, T., Yamamuro, M., Hirakawa, K., Sakamoto, K., Tsujita, K., Hanatani, S., Yamamoto, E., Araki, S., Kanazawa, H., Kojima, S., Kaikita, K., Hokimoto, S., Komohara, Y., Ogawa, H. ” A rare case of long-term survival with idiopathic dilatation of the pulmonary artery “”International Journal of Cardiology 223, pp. 337-339”
  • Tokitsu, T., Yamamoto, E., Hirata, Y., Kusaka, H., Fujisue, K., Sueta, D., Sugamura, K., Sakamoto, K., Tsujita, K., Kaikita, K., Hokimoto, S., Sugiyama, S., Ogawa, H. Clinical significance of pulse pressure in patients with heart failure with preserved left ventricular ejection fraction “European Journal of Heart Failure 18(11), pp. 1353-1361”
  • Tabata, N., Sueta, D., Akasaka, T., Arima, Y., Sakamoto, K., Yamamoto, E., Izumiya, Y., Yamamuro, M., Tsujita, K., Kojima, S., Kaikita, K., Morita, K., Oniki, K., Saruwatari, J., Nakagawa, K., Hokimoto, S. Helicobacter pylori seropositivity in patients with interleukin-1 polymorphisms is significantly associated with ST-Segment elevation myocardial infarction “PLoS ONE 11(11),e0166240”
  • Hokimoto, S., Tabata, N., Yamanaga, K., Sueta, D., Akasaka, T., Tsujita, K., Sakamoto, K., Yamamoto, E., Yamamuro, M., Izumiya, Y., Kaikita, K., Kojima, S., Matsui, K., Ogawa, H. Prevalence of coronary macro- and micro-vascular dysfunctions after drug-eluting stent implantation without in-stent restenosis “International Journal of Cardiology 222, pp. 185-194”
  • Sueta, D., Arima, Y., Hokimoto, S., Mukunoki, T., Tabata, N., Akasaka, T., Sato, T., Otani, J., Ogawa, H.Unprotected left main intervention for surgery-ineligible patients with coronary artery disease—Usefulness of micro-CT images for stent “International Journal of Cardiology 221, pp. 358-389”
  • Sueta, D., Tabata, N., Akasaka, T., Yamashita, T., Ikemoto, T., Hokimoto, S. The dawn of a new era in onco-cardiology: The Kumamoto Classification ” International Journal of Cardiology 220, pp. 837-841 “
  • Tsujita, K., Yamanaga, K., Komura, N., Sakamoto, K., Miyazaki, T., Oimatsu, Y., Ishii, M., Tabata, N., Akasaka, T., Sueta, D., Yamamoto, E., Yamamuro, M., Izumiya, Y., Kojima, S., Nakamura, S., Kaikita, K., Hokimoto, S., Ogawa, H. Clinical and morphological presentations of acute coronary syndrome without coronary plaque rupture — An intravascular ultrasound study “International Journal of Cardiology 220, pp. 112-115”
  • Ishii, M., Kaikita, K., Sato, K., Yamanaga, K., Miyazaki, T., Akasaka, T., Tabata, N., Arima, Y., Sueta, D., Sakamoto, K., Yamamoto, E., Tsujita, K., Yamamuro, M., Kojima, S., Soejima, H., Hokimoto, S., Matsui, K., Ogawa, H. Impact of aspirin on the prognosis in patients with coronary spasm without significant atherosclerotic stenosis “International Journal of Cardiology 220, pp. 328-332″”under conditions of high environmental temperature (Article)
  • Usuku, H., Yamamoto, E., Kurogi, K., Izumiya, Y., Tsujita, K., Yamamuro, M., Kojima, S., Soejima, H., Kaikita, K., Yamamoto, N., Hokimoto, S., Noda, K., Yamabe, H., Oshima, S., Ogawa, H.” Increased body mass index is associated with ST elevation myocardial infarction occurrence under conditions of high environmental temperature “IJC Metabolic and Endocrine 12, pp. 52-54 “
  • Ishii, M., Kaikita, K., Sato, K., Yamanaga, K., Miyazaki, T., Akasaka, T., Tabata, N., Arima, Y., Sueta, D., Sakamoto, K., Yamamoto, E., Tsujita, K., Yamamuro, M., Kojima, S., Soejima, H., Hokimoto, S., Matsui, K., Ogawa, H. Changes in the risk factors for coronary spasm “IJC Heart and Vasculature 12, pp. 85-87 “
  • Tsujita, K., Yamanaga, K., Komura, N., Sakamoto, K., Sugiyama, S., Sumida, H., Shimomura, H., Yamashita, T., Oka, H., Nakao, K., Nakamura, S., Ishihara, M., Matsui, K., Sakaino, N., Nakamura, N., Yamamoto, N., Koide, S., Matsumura, T., Fujimoto, K., Tsunoda, R., Morikami, Y., Matsuyama, K., Oshima, S., Kaikita, K., Hokimoto, S., Ogawa, H.Synergistic effect of ezetimibe addition on coronary atheroma regression in patients with prior statin therapy: Subanalysis of PRECISE-IVUS trial
    “European Journal of Preventive Cardiology 23(14), pp. 1524-1528”
  • Tsujita, K., Yamanaga, K., Komura, N., Sakamoto, K., Sugiyama, S., Sumida, H., Shimomura, H., Yamashita, T., Oka, H., Nakao, K., Nakamura, S., Ishihara, M., Matsui, K., Sakaino, N., Nakamura, N., Yamamoto, N., Koide, S., Matsumura, T., Fujimoto, K., Tsunoda, R., Morikami, Y., Matsuyama, K., Oshima, S., Kaikita, K., Hokimoto, S., Ogawa, H.Lipid profile associated with coronary plaque regression in patients with acute coronary syndrome: Subanalysis of PRECISE-IVUS trial “Atherosclerosis
    251, pp. 367-372”
  • Sueta, D., Hokimoto, S. Onco-cardiology: Present and future “International Journal of Cardiology 215, pp. 38-40”
  • Onoue, Y., Izumiya, Y., Hanatani, S., Tanaka, T., Yamamura, S., Kimura, Y., Araki, S., Sakamoto, K., Tsujita, K., Yamamoto, E., Yamamuro, M., Kojima, S., Kaikita, K., Hokimoto, S. A simple sarcopenia screening test predicts future adverse events in patients with heart failure “International Journal of Cardiology 215, pp. 301-306”
  • Hokimoto, S., Tabata, N., Sueta, D., Akasaka, T., Tsujita, K., Sakamoto, K., Kaikita, K., Kojima, S., Ogawa, H.The real-world prevalence of cardiovascular events related to coronary spasm after percutaneous coronary intervention “Journal of Cardiology
    68(1), pp. 20-28”
  • Tabata, N., Hokimoto, S., Akasaka, T., Arima, Y., Sakamoto, K., Yamamoto, E., Tsujita, K., Izumiya, Y., Yamamuro, M., Kojima, S., Kaikita, K., Ogawa, H. Differential impact of peripheral endothelial dysfunction on subsequent cardiovascular events following percutaneous coronary intervention between chronic kidney disease (CKD) and non-CKD patients “Heart and Vessels 31(7), pp. 1038-1044”
  • Sueta, D., Kaikita, K., Okamoto, N., Yamabe, S., Ishii, M., Arima, Y., Ito, M., Oimatsu, Y., Iwashita, S., Takahashi, A., Sakamoto, K., Tsujita, K., Nakamura, E., Hokimoto, S., Mizuta, H., Ogawa, H. Efficacy Study of the COmbination of Edoxaban and Physiotherapy on the PRevention of Venous-Thromboembolism in patients after Total Knee Arthroplasty (ESCORT-TKA Trial): Study protocol for a randomized controlled trial. ” Clinical Trials and Regulatory Science in Cardiology 19, pp. 1-4 “
  • Hokimoto, S. Historical overview of coronary artery disease “Nihon rinsho. Japanese journal of clinical medicine 74 Pt 1, pp. 7-12”
  • Tabata, N., Hokimoto, S. Coronary vasomotor abnormalities after PCI “Nihon rinsho. Japanese journal of clinical medicine 74 Pt 1, pp. 389-392 ”
    Sueta, D., Hokimoto, S., Okamoto, K., Yasuda, H., Usuku, H., Tazume, H., Yamamoto, E., Sakamoto, K., Izumiya, Y., Tsujita, K., Kaikita, K., Sakaguchi, H., Fukui, T., Ogawa, H.More haste, less speed: Cardiac perforation by a thoracentesis catheter “IJC Heart and Vasculature 11, pp. 17-18 “
  • Tabata, N., Hokimoto, S., Akasaka, T., Sueta, D., Arima, Y., Sakamoto, K., Yamamoto, E., Izumiya, Y., Yamamuro, M., Tsujita, K., Kojima, S., Kaikita, K., Morita, K., Oniki, K., Saruwatari, J., Nakagawa, K., Ogawa, H. Helicobacter Pylori-seropositivity along with genetic and environmental factors predicts clinical outcome after acute coronary syndrome “International Journal of Cardiology 212, pp. 54-56 “
  • Akasaka, T., Hokimoto, S., Sueta, D., Tabata, N., Sakamoto, K., Yamamoto, E., Yamamuro, M., Tsujita, K., Kojima, S., Kaikita, K., Kajiwara, A., Morita, K., Oniki, K., Saruwatari, J., Nakagawa, K., Ogata, Y., Ogawa, H. Sex differences in the impact of CYP2C19 polymorphisms and low-grade inflammation on coronary microvascular disorder “American Journal of Physiology – Heart and Circulatory Physiology 310(11), pp. H1494-H1500 “
  • Komura, N., Tsujita, K., Yamanaga, K., Sakamoto, K., Kaikita, K., Hokimoto, S., Iwashita, S., Miyazaki, T., Akasaka, T., Arima, Y., Yamamoto, E., Izumiya, Y., Yamamuro, M., Kojima, S., Tayama, S., Sugiyama, S., Matsui, K., Nakamura, S., Hibi, K., Kimura, K., Umemura, S., Ogawa, H. Impaired peripheral endothelial function assessed by digital reactive hyperemia peripheral arterial tonometry and risk of in-stent restenosis “Journal of the American Heart Association 5(6),e003202”
  • Yamamura, S., Fujisue, K., Tsujita, K., Sakamoto, K., Miyazaki, Y., Kaikita, K., Hokimoto, S., Ogawa, H. Optical coherence tomography visualization of stent deformation with subsequent thrombus adhesion at very early phase after everolimus-eluting stent implantation: A case report “BMC Cardiovascular Disorders
    16(1),116”
  • Tabata, N., Hokimoto, S., Akasaka, T., Sueta, D., Arima, Y., Sakamoto, K., Yamamoto, E., Izumiya, Y., Yamamuro, M., Tsujita, K., Kojima, S., Kaikita, K., Morita, K., Oniki, K., Saruwatari, J., Nakagawa, K., Yamabe, H., Matsui, K., Ogawa, H. Helicobacter pylori-seropositivity along with pro-inflammatory interleukin-1 polymorphisms correlated with myocardial infarction “Clinical Trials and Regulatory Science in Cardiology 17, pp. 9-14 “
  • Onoue, Y., Izumiya, Y., Hanatani, S., Kimura, Y., Araki, S., Sakamoto, K., Yamamoto, E., Tsujita, K., Tanaka, T., Yamamuro, M., Kojima, S., Kaikita, K., Hokimoto, S., Ogawa, H.Fragmented QRS complex is a diagnostic tool in patients with left ventricular diastolic dysfunction “Heart and Vessels 31(4), pp. 563-567 “
  • Arima, Y., Kaikita, K., Ishii, M., Ito, M., Sueta, D., Oimatsu, Y., Sakamoto, K., Tsujita, K., Kojima, S., Nakagawa, K., Hokimoto, S., Ogawa, H.Fragmented QRS complex is a diagnostic tool in patients with left ventricular diastolic dysfunction ” Heart and Vessels 31(4), pp. 563-567 “
  • Sakamoto, T., Ogawa, H., Nakao, K., Hokimoto, S., Tsujita, K., Koide, S., Yamamoto, N., Shimomura, H., Matsumura, T., Oshima, S., Kikuta, K., Oka, H., Kimura, K., Matsui, K., Morikami, Y., Sakaino, N., Dote, K., Miyao, Y., Nakama, Y., Yamaguchi, H., Kajiwara, I., Takano, H., Kanaya, H., Tanimoto, S., Matsuyama, K., Yoshino, H., Yamashina, A., Ogata, Y., Hirai, N., Yajima, J., Nakamura, S., Sueda, S., Shibata, Y., Yano, M., Seino, Y., Naruko, T., Enomoto, T., Wada, A., Saito, Y., Mizuno, Y., Shiode, N., Misumi, I., Maruyama, H. Impact of candesartan on cardiovascular events after drug-eluting stent implantation in patients with coronary artery disease: The 4C trial “Journal of Cardiology 67(4), pp. 371-377 “
  • Hokimoto, S. Antithrombotic therapy after stent implantation (antiplatelet therapy • anticoagulant therapy) “Respiration and Circulation 64(3), pp. 288-293”
  • Sueta, D., Hokimoto, S., Utsunomiya, D., Tabata, N., Akasaka, T., Sakamoto, K., Tsujita, K., Kaikita, K., Yamashita, Y., Ogawa, H. New aspects of onco-cardiology “International Journal of Cardiology 206, pp. 68-70 “
  • Ogura, Y., Tsujita, K., Shimomura, H., Yamanaga, K., Komura, N., Miyazaki, T., Ishii, M., Tabata, N., Akasaka, T., Arima, Y., Sakamoto, K., Kojima, S., Nakamura, S., Kaikita, K., Hokimoto, S., Ogawa, H.Clinical characteristics and intravascular ultrasound findings of culprit lesions in elderly patients with acute coronary syndrome “Heart and Vessels 31(3), pp. 341-350 “
  • Tsujita, K., Yamanaga, K., Kaikita, K., Hokimoto, S., Ogawa, H. How should we treat myocardial infarction patients with multivessel disease?: Staged revascularization? Or stent them all acutely? “Circulation Journal
    80(2), pp. 318-320”
  • Tsujita, K., Sugiyama, S., Shimomura, H., Yamanaga, K., Kaikita, K., Hokimoto, S., Ogawa, H.Reply Dual Lipid-Lowering Strategy with Ezetimibe and Atorvastatin on Coronary Plaque Regression after PCI: PRECISE-IVUS “Journal of the American College of Cardiology 67(2), pp. 234-235 “
  • Tsujita, K., Sugiyama, S., Shimomura, H., Yamanaga, K., Kaikita, K., Hokimoto, S., Ogawa, H. Reply Getting What the Guidelines Stated Matters “Journal of the American College of Cardiology 67(1), pp. 120-121 “
  • Sueta, D., Kojima, S., Izumiya, Y., Yamamuro, M., Kaikita, K., Hokimoto, S., Ogawa, H.A destabilized case of stable effort angina pectoris induced by low-dose adenosine triphosphate ” Internal Medicine 55(22), pp. 3291-3294 “
  • Kimura, Y., Izumiya, Y., Hanatani, S., Yamamoto, E., Kusaka, H., Tokitsu, T., Takashio, S., Sakamoto, K., Tsujita, K., Tanaka, T., Yamamuro, M., Kojima, S., Tayama, S., Kaikita, K., Hokimoto, S., Ogawa, H. High serum levels of thrombospondin-2 correlate with poor prognosis of patients with heart failure with preserved ejection fraction “Heart and Vessels 31(1), pp. 52-59”
  • Misumi, I., Honda, T., Usuku, H., Togashi, A., Kiyama, T., Tsunoda, R., Obayashi, H., Yasuda, H., Kaikita, K., Hokimoto, S., Ogawa, H. Refractory hypotension after cardioversion in a patient with atrial fibrillation and congestive heart failure ” Internal Medicine 55(13), pp. 1747-1750 “
  • Tabata, N., Hokimoto, S., Akasaka, T., Arima, Y., Sakamoto, K., Yamamoto, E., Tsujita, K., Izumiya, Y., Yamamuro, M., Kojima, S., Kaikita, K., Kumagae, N., Morita, K., Oniki, K., Nakagawa, K., Matsui, K., Ogawa, H. Patients with both CYP2C19 loss-of-function allele and peripheral endothelial dysfunction are significantly correlated with adverse cardiovascular events following coronary stent implantation “Journal of Cardiology 67(1), pp. 104-109 “
  • Ito, M., Kaikita, K., Sueta, D., Ishii, M., Oimatsu, Y., Arima, Y., Iwashita, S., Takahashi, A., Hoshiyama, T., Kanazawa, H., Sakamoto, K., Yamamoto, E., Tsujita, K., Yamamuro, M., Kojima, S., Hokimoto, S., Yamabe, H., Ogawa, H. Total Thrombus-formation Analysis System (T-TAS) can predict periprocedural bleeding events in patients undergoing catheter ablation for atrial fibrillation “Journal of the American Heart Association 5(1),e002744”
    Saravanan, S., Raghukandan, K., Hokamoto, K. Improved microstructure and mechanical properties of dissimilar explosive cladding by means of interlayer technique “Archives of Civil and Mechanical Engineering 16(4), pp. 563-568 “
  • Vesenjak, M., Hokamoto, K., Matsumoto, S., Marumo, Y., Ren, Z. Uni-directional porous metal fabricated by rolling of copper sheet and explosive compaction “Materials Letters 170, pp. 39-43 “
  • Vesenjak, M., Hokamoto, K., Sakamoto, M., Nishi, T., Krstulović-Opara, L., Ren, Z.Mechanical and microstructural analysis of unidirectional porous (UniPore) copper “Materials and Design 90, pp. 867-880”
  • Higa, O., Yasuda, A., Higa, Y., Shimojima, K., Hokamoto, K., Itoh, S. Optical examination of shockwave propagation induced by an underwater wire explosion “International Journal of Multiphysics 10(4), pp. 343-354”
  • Kitahara, H., Matsushita, S., Tsushida, M., Ando, S., Tsuji, N. Fatigue properties of ARB-processed Ti sheets with crystallographic texture”International Journal of Fatigue
    92, pp. 18-24 “
  • Kitahara, H., Tsushida, M., Ando, S. Orientation dependence of bending deformation behavior in magnesium single crystals “Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals 80(1), pp. 102-107 “
  • Kitahara, H., Tsushida, M., Ando, S. Orientation dependence of bending deformation behavior in magnesium single crystals “Materials Transactions 57(8), pp. 1246-1251 “
  • Fukuda, K., Koyanagi, Y., Tsushida, M., Kitahara, H., Mayama, T., Ando, S.Activation stress for slip systems of pure magnesium single crystals in pure shear test “Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals 80(5), pp. 334-339 “
  • Vesenjak, M., Hokamoto, K., Matsumoto, S., Marumo, Y., Ren, Z. Uni-directional porous metal fabricated by rolling of copper sheet and explosive compaction “Materials Letters
    170, pp. 39-43 “
  • Shimoyama, Y., Terasaki, H., Urakawa, S., Takubo, Y., Kuwabara, S., Kishimoto, S., Watanuki, T., Machida, A., Katayama, Y., Kondo, T. Thermoelastic properties of liquid Fe-C revealed by sound velocity and density measurements at high pressure “Journal of Geophysical Research: Solid Earth 121(11), pp. 7984-7995 “
  • Nishida, K., Suzuki, A., Terasaki, H., Shibazaki, Y., Higo, Y., Kuwabara, S., Shimoyama, Y., Sakurai, M., Ushioda, M., Takahashi, E., Kikegawa, T., Wakabayashi, D., Funamori, N.Towards a consensus on the pressure and composition dependence of sound velocity in the liquid Fe–S system “Physics of the Earth and Planetary Interiors 257, pp. 230-239 “
  • Shibazaki, Y., Nishida, K., Higo, Y., Igarashi, M., Tahara, M., Sakamaki, T., Terasaki, H., Shimoyama, Y., Kuwabara, S., Takubo, Y., Ohtani, E.Compressional and shear wave velocities for polycrystalline bcc-Fe up to 6.3 GPa and 800 K “American Mineralogist
    101(5), pp. 1150-1160 “
  • Shigemori, K., Kato, H., Nakai, M., Hosogi, R., Sakaiya, T., Terasaki, H., Fujioka, S., Sunahara, A., Azechi, H. Mitigation of Laser Imprinting with Diamond Ablator for Direct-Drive Inertial Confinement Fusion Targets “Journal of Physics: Conference Series 688(1),012107”
  • Kuwabara, S., Terasaki, H., Nishida, K., Shimoyama, Y., Takubo, Y., Higo, Y., Shibazaki, Y., Urakawa, S., Uesugi, K., Takeuchi, A., Kondo, T. Sound velocity and elastic properties of Fe–Ni and Fe–Ni–C liquids at high pressure “Physics and Chemistry of Minerals 43(3), pp. 229-236”

2015

  • Okuda, H., Yamasaki, M., Kawamura, Y., Tabuchi, M., Kimizuka, H., Nanoclusters first: A hierarchical phase transformation in a novel Mg alloy, Scientific Reports, 5, art. no. 14186, 2015.
  • Matsushita, M., Bednarcik, J., Sakata, Y., Akamatsu, S., Nishiyama, N., Michalikova, J., Yamasaki, M., Kawamura, Y., Synchronized collapse and formation of long-period stacking and chemical orders in Mg85Zn6Y9, Physica B: Condensed Matter, 461, pp. 147-153, 2015.
  • Hosokawa, S., Yamasaki, M., Kawamura, Y., Inui, M., Kajihara, Y., Tsutsui, S., Baron, A.Q.R., Microscopic elastic properties of polycrystalline Mg85Zn6Y9 alloy with long-period stacking ordered 18R phase investigated by inelastic X-ray scattering, Materials Transactions, 56 (7), pp. 914-916, 2015.
  • Okuda, H., Horiuchi, T., Tanaka, H., Yamasaki, M., Kawamura, Y., Kimura, S., Stability of long-period stacking ordered structures at elevated temperatures examined by multicolor synchrotron radiation X-ray scattering/diffraction measurements, Materials Transactions, 56 (7), pp. 906-909, 2015.
  • Matsushita, M., Sakata, Y., Senzaki, T., Yamasaki, M., Yamada, I., Saitoh, H., Shinmei, T., Irifune, T., Nishiyama, N., Kawamura, Y., Phase relations among D03, α-Mg, and long-period stacking orders in Mg85Zn6Y9 alloy under 3 GPa, Materials Transactions, 56 (7), pp. 910-913, 2015.
  • Terasaki, H., Miyahara, Y., Ohata, M., Moriguchi, K., Tomio, Y., Hayashi, K., Visualization of Microstructural Factor Resisting the Cleavage-Crack Propagation in the Simulated Heat-Affected Zone of Bainitic Steel, Metall. Mater. Trans. A, 46, pp. 5489-5493, 2015.
  • Terasaki, H., Shintome, Y., Komizo, Y.-I., Ohata, M., Moriguchi, K., Tomio, Y., Effect of Close-Packed Plane Boundaries in a Bain Zone on the Crack Path in Simulated Coarse-Grained HAZ of Bainitic Steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 46 (5), pp.2035-2039, 2015.
  • Takada, A., Komizo, Y.-I., Terasaki, H., Yokota, T., Oi, K., Yasuda, K., Crystallographic analysis for acicular ferrite formation in low carbon steel weld metals, Welding International, 29(4), pp.254-261, 2015.
  • Matsuda, M., Nishimura, S., Tsurekawa, S., Takashima, K., Mitsuhara, M., Nishida, M., Crystallography and morphology of antiphase boundary-like structure induced by martensitic transformation in Ti-Pd-Fe alloy, Journal of Alloys and Compounds, 618, pp. 527-532, 2015.
  • Matsuda, M., Tanaka, F., Tsurekawa, S., Takashima, K., Mitsuhara, M., Nishida, M., Novel long-period stacking-ordered structure of martensite in zirconium-cobalt-palladium alloys, Philosophical Magazine Letters, 95 (1), pp. 21-29, 2015.
  • Matsushita, M., Yamamoto, S., Nishiyama, N., Sakata, Y., Yamasaki, M., Bednarcik, J., Irifune, T., Kawamura, Y., D03+hcp mixed phase with nanostructures in Mg85 Zn6Y9 alloy obtained by highpressure and high-temperature treatments, Materials Letters, 155, pp.11-14, 2015.
  • Jono, Y., Yamasaki, M., Kawamura, Y., Quantitative evaluation of creep strain distribution in an extruded Mg-Zn-Gd alloy of multimodal microstructure, Acta Materialia, 82, pp.198-211, 2015.
  • Hagihara, K., Yamasaki, M., Honnami, M., Izuno, H., Tane, M., Nakano, T., Kawamura, Y., Crystallographic nature of deformation bands shown in Zn and Mg-based long-period stacking ordered (LPSO) phase, Philosophical Magazine, 95 (2), pp.132-157, 2015.
  • Hagihara, K., Honnami, M., Matsumoto, R., Fukusumi, Y., Izuno, H., Yamasaki, M., Okamoto, T., Nakano, T., Kawamura, Y., In-situ observation on the formation behavior of the deformation kink bands in Zn single crystal and LPSO phase, Materials Transactions, 56 (7), pp.943-951, 2015.
  • Tane, M., Kimizuka, H., Hagihara, K., Suzuki, S., Mayama, T., Sekino, T., Nagai, Y., Effects of stacking sequence and short-range ordering of solute atoms on elastic properties of Mg-Zn-Y alloys with longperiod stacking ordered structures, Acta Materialia, 96, pp. 170-188, 2015.
  • Tane, M., Mayama, T., Oda, A., Nakajima, H., Effect of crystallographic texture on mechanical properties in porous magnesium with oriented cylindrical pores, Acta Materialia, 84, pp. 80-94, 2015.
  • Shiraishi, K., Mayama, T., Yamasaki, M., Kawamura, Y., Influence of long period stacking ordered phase on non-uniform deformation in cast Mg-Zn-Y alloys, Materials Science Forum, 816, pp. 481-485, 2015.
  • Mayama, T., Ohashi, T., Tadano, Y., Hagihara, K., Crystal plasticity analysis of development of intragranular misorientations due to kinking in HCP single crystals subjected to uniaxial compressive loading, Materials Transactions, 56 (7), pp. 963-972, 2015.
  • Mine, Y., Maezono, R., Oda, H., Yamasaki, M., Kawamura, Y., Takashima, K., Deformation behavior of long-period stacking ordered structured single crystals in Mg85Zn6Y9 alloy, Materials Transactions, 56 (7), pp. 952-956, 2015.
  • Mine, Y., Haraguchi, D., Horita, Z., Takashima, K., High-pressure torsion of metastable austenitic stainless steel at moderate temperatures, Philosophical Magazine Letters, 95 (5), pp. 269-276, 2015.
  • Pissuwan, D., Niidome, T., Polyelectrolyte-coated gold nanorods and their biomedical applications, Nanoscale, 7 (1), pp. 59-65, 2015.
  • Haine, A.T., Niidome, T., Drug delivery systems controlled by irradiation of near infrared light, Journal of Photopolymer Science and Technology, 28 (5), pp. 705-710, 2015.
  • Niidome, T., Fujii, M., Nakashima, N., Katayama, Y., Niidome, Y., Imaging mass spectrometry of gold nanorods distributed in tumor tissues, Chemistry Letters, 44 (7), pp. 931-933, 2015.
  • Sueta, D., Hokimoto, S., Miyazaki, T., Sakamoto, K., Tsujita, K., Yamamoto, E., Tabata, N., Kojima, S., Kaikita, K., Ogawa, H., Usefulness of excimer laser atherectomy for balloon uncrossable lesion in chronic total occlusion, IJC Heart and Vasculature, 9, pp. 70-72, 2015.
  • Kusaka, H., Yamamoto, E., Hirata, Y., Fujisue, K., Tokitsu, T., Sugamura, K., Sakamoto, K., Tsujita, K., Kaikita, K., Hokimoto, S., Sugiyama, S., Ogawa, H., Clinical significance of plasma galectin-3 in patients with coronary artery disease, International Journal of Cardiology, 201, pp. 532-534, 2015.
  • Yoshimura, H., Kaikita, K., Ono, T., Iwashita, S., Nakayama, N., Sato, K., Horio, E., Tsujita, K., Kojima, S., Tayama, S., Hokimoto, S., Ogawa, H., Lack of association between peri-procedural myocardial damage and CYP2C19 gene variant in elective percutaneous coronary intervention, Heart and Vessels, 30 (5), pp. 572-579, 2015.
  • Sueta, D., Yamamoto, E., Hirata, Y., Tokitsu, T., Sakamoto, K., Tsujita, K., Kaikita, K., Hokimoto, S., Sakanashi, T., Ogawa, H., Novel vascular indices evaluated non-invasively in end-stage renal disease patients on hemodialysis, Clinical Trials and Regulatory Science in Cardiology, 9, pp. 1-3, 2015.
  • Sueta, D., Hokimoto, S., Hirayama, R., Suzuki, R., Ogawa, H., A case of spontaneous and simultaneous dissections of both common iliac arteries in a young patient, Clinical Trials and Regulatory Science in Cardiology, 9, pp. 4-5, 2015.
  • Sueta, D., Kaikita, K., Okamoto, N., Arima, Y., Ishii, M., Ito, M., Oimatsu, Y., Iwashita, S., Takahashi, A., Nakamura, E., Hokimoto, S., Mizuta, H., Ogawa, H., A novel quantitative assessment of whole blood thrombogenicity in patients treated with a non-vitamin K oral anticoagulant, International Journal of Cardiology, 197, art. no. 20697, pp. 98-100, 2015.
  • Yamamoto, E., Hirata, Y., Tokitsu, T., Kusaka, H., Sakamoto, K., Yamamuro, M., Kaikita, K., Watanabe, H., Hokimoto, S., Sugiyama, S., Maruyama, T., Ogawa, H., The pivotal role of eNOS uncoupling in vascular endothelial dysfunction in patients with heart failure with preserved ejection fraction, International Journal of Cardiology, 190 (1), pp. 335-337, 2015.
  • Tokitsu, T., Yamamoto, E., Hirata, Y., Fujisue, K., Sueta, D., Sugamura, K., Sakamoto, K., Kaikita, K., Hokimoto, S., Sugiyama, S., Ogawa, H., Clinical significance of pulse pressure in patients with coronary artery disease, International Journal of Cardiology, 190 (1), pp. 299-301, 2015.

2014

  • Okuda, H., Horiuchi, T., Yamasaki, M., Kawamura, Y., Kohara, S., In situ measurements on stability of long-period stacking-ordered structures in Mg85Y9Zn6 alloys during heating examined by multicolor synchrotron radiation small-angle scattering, Scripta Materialia, 75, pp. 66-69, 2014.
  • Padhy, G.K., Terasaki, H., Komizo, Y.-I., Hydrogen distribution and hydrogen cracking susceptibility of a martensitic-austenitic steel welding wire, Materials Letters, 136, pp.22-25, 2014.
  • Terasaki, H., Shintome, Y., Takada, A., Komizo, Y.-I., Moriguchi, K., Tomio, Y., Visualization and analysis of variant grouping in continuously cooled low-carbon steel welds, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45(8), pp. 3554-3559, 2014.
  • Morito, S., Yoshida, S., Hayamizu, R., Hayashi, T., Ohba, T., Terasaki, H., Komizo, Y.-I., Three-dimensional approach to observing growth of blocks and packets in Fe-18Ni maraging steel, Advanced Materials Research, 783-786, pp. 916-919, 2014.
  • Matsuda, M., Yamashita, K., Tsurekawa, S., Takashima, K., Nishida, M., Ductility enhancement in Co-Fe-Ni alloys by microstructural control, Intermetallics, 52, pp. 124-130, 2014.
  • Fujisawa, T., Hamada, S., Koga, N., Sasaki, D., Tsuchiyama, T., Nakada, N., Takashima, K., Ueda, M., Noguchi, H., Proposal for an engineering definition of a fatigue crack initiation unit for evaluating the fatigue limit on the basis of crystallographic analysis of pearlitic steel, International Journal of Fracture, 185 (1-2), pp. 17-29, 2014.
  • Otsu, M., Yasunaga, M., Matsuda, M., Takashima, K., Friction stir incremental forming of A2017 aluminum sheets, Procedia Engineering, 81, pp. 2318-2323, 2014.
  • Matsuda, M., Yamashita, R., Tsurekawa, S., Takashima, K., Mitsuhara, M., Nishida, M., Antiphase boundary-like structure of B19′ martensite via R-phase transformation in Ti-Ni-Fe alloy, Journal of Alloys and Compounds, 586, pp. 87-93, 2014.
  • Kitahara, H., Yada, T., Hashiguchi, F., Tsushida, M., Ando, S., Mg alloy sheets with a nanocrystalline surface layer fabricated by wire-brushing, Surface and Coatings Technology, 243, pp. 28-33, 2014.
  • Kitahara, H., Maruno, F., Tsushida, M., Ando, S., Deformation behavior of Mg single crystals during a single ECAP pass at room temperature, Materials Science and Engineering A, 590, pp. 274-280, 2014.
  • Ando, S., Kodera, A., Fukushima, K., Tsushida, M., Kitahara, H., Tensile deformation of magnesium and magnesium alloy single crystals, Advanced Materials Research, 783-786, pp. 341-345, 2014.
  • Ando, S., Kodera, A., Fukushima, K., Tsushida, M., Kitahara, H., Tensile deformation of magnesium and magnesium alloy single crystals, Materials Science Forum, 783-786, pp. 341-345, 2014.
  • Kitahara, H., Mayama, T., Okumura, K., Tadano, Y., Tsushida, M., Ando, S., Anisotropic deformation induced by spherical indentation of pure Mg single crystals, Acta Materialia, 78, pp. 290-300, 2014.
  • Hama, T., Mayama, T., Takuda, H., Deformation Behavior of a Magnesium Alloy Sheet with random crystallographic orientations, Key Engineering Materials, 611-612, pp. 27-32, 2014.
  • Mine, Y., Takashima, H., Matsuda, M., Takashima, K., Microtension behaviour of lenticular martensite structure of Fe-30mass% Ni alloy, Materials Science and Engineering A, 618, pp. 359-367, 2014.
  • Kim, J., Weldability of Cu54Zr22Ti18Ni6 bulk metallic glass by ultrasonic welding processing, Materials Letters, 130, pp. 160-163, 2014.
  • Toita, R., Kang, J.-H., Kim, C.W., Shiosaki, S., Mori, T., Niidome, T., Katayama, Y., Effect of peptide content on the regulation of transgene expression by protein kinase Cα-responsive linear polyethyleniminepeptide conjugates, Colloids and Surfaces B: Biointerfaces, 123, pp. 123-129, 2014.
  • Niidome, T., Yamauchi, H., Takahashi, K., Naoyama, K., Watanabe, K., Mori, T., Katayama, Y., Hydrophobic cavity formed by oligopeptide for doxorubicin delivery based on dendritic poly(L-lysine), Journal of Biomaterials Science, Polymer Edition, 25 (13), pp. 1362-1373, 2014.
  • Niidome, T., Gokuden, R., Watanabe, K., Mori, T., Naganuma, T., Utsumi, H., Ichikawa, K., Katayama, Y., Nitroxyl radicals-modified dendritic poly(l -lysine) as a contrast agent for Overhauser-enhanced MRI, Journal of Biomaterials Science, Polymer Edition, 25 (13), pp. 1425-1439, 2014.
  • Nobori, T., Shiosaki, S., Mori, T., Toita, R., Kim, C.W., Nakamura, Y., Kishimura, A., Niidome, T., Katayama, Y., Fluorescent polyion complex nanoparticle that incorporates an internal standard for quantitative analysis of protein kinase activity, Bioconjugate Chemistry, 25 (5), pp. 869-872, 2014.
  • Niidome, T., Chijiiwa, N., Yamasaki, T., Yamada, K.-I., Mori, T., Naganuma, T., Utsumi, H., Ichikawa, K., Katayama, Y., Change in overhauser effect-enhanced MRI signal in response to uPA highly expressing in tumor, Chemistry Letters, 43 (7), pp. 999-1001, 2014.

2013

  • Terasaki, H., Komizo, Y.-I., Correlation between the microstructural development of bainitic ferrite and the characteristics of martensite-austenite constituent, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (12), pp. 5289-5293, 2013.
  • Terasaki, H., Komizo, Y.-I., Morphology and crystallography of bainite transformation in a single prior-austenite grain of low-carbon steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (6), pp. 2683-2689, 2013.
  • Matsuda, M., Iwamoto, Y., Morizono, Y., Tsurekawa, S., Takashima, K., Nishida, M., Enhancement of ductility in B2-type Zr-Co-Ni alloys with deformation-induced martensite and microcrack formation, Intermetallics, 36, pp. 45-50, 2013.
  • Takamatsu, Y., Tsushida, M., Kitahara, H., Ando, S., Investigation of micro-deformation behavior in pure magnesium and magnesium alloy single crystals using indentation test, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, 3, pp. 1606-1610, 2013.
  • Kodera, A., Yagi, T., Tsushida, M., Kitahara, H., Ando, S., Deformation behavior of Mg-Al-Zn alloy single crystals, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, 3, pp. 1574-1579, 2013.
  • Ando, S., Kodera, A., Yagi, T., Tsushida, M., Kitahara, H., Alloying effects on non-basal slips in magnesium single crystals, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, 2, pp. 1449-1454, 2013.
  • Kitahara, H., Matsushita, S., Tsushida, M., Ando, S., Effect of ARB processing on fatigue crack closure in commercially pure titanium, Materials Transactions, 54 (4), pp. 528-531, 2013.
  • Yamasaki, M., Matsushita, M., Hagihara, K., Izuno, H., Abe, E., Kawamura, Y., Highly ordered 10H-type long-period stacking order phase in a Mg-Zn-Y ternary alloy, Scripta Materialia, 78-79, pp. 13-16, 2014.
    ･Jono, Y., Yamasaki, M., Kawamura, Y., Effect of LPSO phase-stimulated texture evolution on creep resistance of extruded Mg-Zn-Gd alloys, Materials Transactions, 54 (5), pp. 703-712, 2013.
  • Yamasaki, M., Kato, Z., Akiyama, E., Habazaki, H., The use of renewable energy in the form of methane via electrolytic hydrogen generation, Archives of Metallurgy and Materials, 58 (1), pp. 231-239, 2013.
  • Yamasaki, M., Hagihara, K., Inoue, S.-I., Hadorn, J.P., Kawamura, Y., Crystallographic classification of kink bands in an extruded Mg-Zn-Y alloy using intragranular misorientation axis analysis, Acta Materialia, 61 (6), pp. 2065-2076, 2013.
  • Mine, Y., Yoshimura, H., Matsuda, M., Takashima, K., Kawamura, Y., Microfracture behaviour of extruded Mg-Zn-Y alloys containing long-period stacking ordered structure at room and elevated temperatures, Materials Science and Engineering A, 570, pp. 63-69, 2013.
  • Mine, Y., Hirashita, K., Takashima, H., Matsuda, M., Takashima, K., Micro-tension behaviour of lath martensite structures of carbon steel, Materials Science and Engineering A, 560, pp. 535-544, 2013.
  • Kim, J., Kawamura, Y., Influence of Rare Earth Elements on Microstructure and Mechanical Properties of Mg97Zn1Y1RE1 Alloys, Materials Science and Engineering A, 573, pp. 62-66, 2013.
  • Hadorn, J.P., Yamasaki, M., Kim, J., Kawamura, Y., Characterization of an al-y-zn intermetallic particle phase in extruded Mg96-xAlxZn2Y1.9La0.1 alloys, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (6), pp. 2839-2848, 2013.
  • Kim, J., Kawamura, Y., Effect of the extrusion conditions on the microstructure and mechanical properties of indirect extruded Mg-Zn-Y alloy with LPSO phase, Magnesium Technology, pp. 217-219, 2013.
・The author with red underline is a faculty of the Magnesium Research Center at Kumamoto University.