論文リスト

2013

  • Terasaki, H., Komizo, Y.-I., Correlation between the microstructural development of bainitic ferrite and the characteristics of martensite-austenite constituent, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (12), pp. 5289-5293, 2013.
  • Terasaki, H., Komizo, Y.-I., Morphology and crystallography of bainite transformation in a single prior-austenite grain of low-carbon steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (6), pp. 2683-2689, 2013.
  • Matsuda, M., Iwamoto, Y., Morizono, Y., Tsurekawa, S., Takashima, K., Nishida, M., Enhancement of ductility in B2-type Zr-Co-Ni alloys with deformation-induced martensite and microcrack formation, Intermetallics, 36, pp. 45-50, 2013.
  • Takamatsu, Y., Tsushida, M., Kitahara, H., Ando, S., Investigation of micro-deformation behavior in pure magnesium and magnesium alloy single crystals using indentation test, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, 3, pp. 1606-1610, 2013.
  • Kodera, A., Yagi, T., Tsushida, M., Kitahara, H., Ando, S., Deformation behavior of Mg-Al-Zn alloy single crystals, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, 3, pp. 1574-1579, 2013.
  • Ando, S., Kodera, A., Yagi, T., Tsushida, M., Kitahara, H., Alloying effects on non-basal slips in magnesium single crystals, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, 2, pp. 1449-1454, 2013.
  • Kitahara, H., Matsushita, S., Tsushida, M., Ando, S., Effect of ARB processing on fatigue crack closure in commercially pure titanium, Materials Transactions, 54 (4), pp. 528-531, 2013.
  • Yamasaki, M., Matsushita, M., Hagihara, K., Izuno, H., Abe, E., Kawamura, Y., Highly ordered 10H-type long-period stacking order phase in a Mg-Zn-Y ternary alloy, Scripta Materialia, 78-79, pp. 13-16, 2014.
    ･Jono, Y., Yamasaki, M., Kawamura, Y., Effect of LPSO phase-stimulated texture evolution on creep resistance of extruded Mg-Zn-Gd alloys, Materials Transactions, 54 (5), pp. 703-712, 2013.
  • Yamasaki, M., Kato, Z., Akiyama, E., Habazaki, H., The use of renewable energy in the form of methane via electrolytic hydrogen generation, Archives of Metallurgy and Materials, 58 (1), pp. 231-239, 2013.
  • Yamasaki, M., Hagihara, K., Inoue, S.-I., Hadorn, J.P., Kawamura, Y., Crystallographic classification of kink bands in an extruded Mg-Zn-Y alloy using intragranular misorientation axis analysis, Acta Materialia, 61 (6), pp. 2065-2076, 2013.
  • Mine, Y., Yoshimura, H., Matsuda, M., Takashima, K., Kawamura, Y., Microfracture behaviour of extruded Mg-Zn-Y alloys containing long-period stacking ordered structure at room and elevated temperatures, Materials Science and Engineering A, 570, pp. 63-69, 2013.
  • Mine, Y., Hirashita, K., Takashima, H., Matsuda, M., Takashima, K., Micro-tension behaviour of lath martensite structures of carbon steel, Materials Science and Engineering A, 560, pp. 535-544, 2013.
  • Kim, J., Kawamura, Y., Influence of Rare Earth Elements on Microstructure and Mechanical Properties of Mg97Zn1Y1RE1 Alloys, Materials Science and Engineering A, 573, pp. 62-66, 2013.
  • Hadorn, J.P., Yamasaki, M., Kim, J., Kawamura, Y., Characterization of an al-y-zn intermetallic particle phase in extruded Mg96-xAlxZn2Y1.9La0.1 alloys, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (6), pp. 2839-2848, 2013.
  • Kim, J., Kawamura, Y., Effect of the extrusion conditions on the microstructure and mechanical properties of indirect extruded Mg-Zn-Y alloy with LPSO phase, Magnesium Technology, pp. 217-219, 2013.
・The author with red underline is a faculty of the Magnesium Research Center at Kumamoto University.