業績リスト

Publications

業績リスト

2016

  • Okayasu, M., Takeuchi, S., Matsushita, M., Tada, N., Yamasaki, M., Kawamura, Y., Mechanical properties and failure characteristics of cast and extruded Mg97Y2Zn1 alloys with LPSO phase, Materials Science and Engineering A, 652, pp. 14-29, 2016
  • Higashi, Y., Iwamoto, C., Kawamura, Y., Microstructure evolution and mechanical properties of extruded Mg96Zn2Y2 alloy joints with ultrasonic spot welding, Materials Science and Engineering A, 651, pp. 925-934, 2016.
  • Hagihara, K., Mayama, T, Honnami, M., Yamasaki, M., Izuno, H., Okamoto, T., Ohashi, T., Nakano, T., Kawamura, Y., Orientation dependence of the deformation kink band formation behavior in Zn single crystal, International Journal of Plasticity, 77, pp. 174-191, 2016.
  • Mine, Y., Koga, K., Kraft, O., Takashima, K., Mechanical characterisation of hydrogen-induced quasi-cleavage in a metastable austenitic steel using micro-tensile, Scripta Materialia, 113, pp. 176-179, 2016.

2015

  • Okuda, H., Yamasaki, M., Kawamura, Y., Tabuchi, M., Kimizuka, H., Nanoclusters first: A hierarchical phase transformation in a novel Mg alloy, Scientific Reports, 5, art. no. 14186, 2015.
  • Matsushita, M., Bednarcik, J., Sakata, Y., Akamatsu, S., Nishiyama, N., Michalikova, J., Yamasaki, M., Kawamura, Y., Synchronized collapse and formation of long-period stacking and chemical orders in Mg85Zn6Y9, Physica B: Condensed Matter, 461, pp. 147-153, 2015.
  • Hosokawa, S., Yamasaki, M., Kawamura, Y., Inui, M., Kajihara, Y., Tsutsui, S., Baron, A.Q.R., Microscopic elastic properties of polycrystalline Mg85Zn6Y9 alloy with long-period stacking ordered 18R phase investigated by inelastic X-ray scattering, Materials Transactions, 56 (7), pp. 914-916, 2015.
  • Okuda, H., Horiuchi, T., Tanaka, H., Yamasaki, M., Kawamura, Y., Kimura, S., Stability of long-period stacking ordered structures at elevated temperatures examined by multicolor synchrotron radiation X-ray scattering/diffraction measurements, Materials Transactions, 56 (7), pp. 906-909, 2015.
  • Matsushita, M., Sakata, Y., Senzaki, T., Yamasaki, M., Yamada, I., Saitoh, H., Shinmei, T., Irifune, T., Nishiyama, N., Kawamura, Y., Phase relations among D03, α-Mg, and long-period stacking orders in Mg85Zn6Y9 alloy under 3 GPa, Materials Transactions, 56 (7), pp. 910-913, 2015.
  • Terasaki, H., Miyahara, Y., Ohata, M., Moriguchi, K., Tomio, Y., Hayashi, K., Visualization of Microstructural Factor Resisting the Cleavage-Crack Propagation in the Simulated Heat-Affected Zone of Bainitic Steel, Metall. Mater. Trans. A, 46, pp. 5489-5493, 2015.
  • Terasaki, H., Shintome, Y., Komizo, Y.-I., Ohata, M., Moriguchi, K., Tomio, Y., Effect of Close-Packed Plane Boundaries in a Bain Zone on the Crack Path in Simulated Coarse-Grained HAZ of Bainitic Steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 46 (5), pp.2035-2039, 2015.
  • Takada, A., Komizo, Y.-I., Terasaki, H., Yokota, T., Oi, K., Yasuda, K., Crystallographic analysis for acicular ferrite formation in low carbon steel weld metals, Welding International, 29(4), pp.254-261, 2015.
  • Matsuda, M., Nishimura, S., Tsurekawa, S., Takashima, K., Mitsuhara, M., Nishida, M., Crystallography and morphology of antiphase boundary-like structure induced by martensitic transformation in Ti-Pd-Fe alloy, Journal of Alloys and Compounds, 618, pp. 527-532, 2015.
  • Matsuda, M., Tanaka, F., Tsurekawa, S., Takashima, K., Mitsuhara, M., Nishida, M., Novel long-period stacking-ordered structure of martensite in zirconium-cobalt-palladium alloys, Philosophical Magazine Letters, 95 (1), pp. 21-29, 2015.
  • Matsushita, M., Yamamoto, S., Nishiyama, N., Sakata, Y., Yamasaki, M., Bednarcik, J., Irifune, T., Kawamura, Y., D03+hcp mixed phase with nanostructures in Mg85 Zn6Y9 alloy obtained by highpressure and high-temperature treatments, Materials Letters, 155, pp.11-14, 2015.
  • Jono, Y., Yamasaki, M., Kawamura, Y., Quantitative evaluation of creep strain distribution in an extruded Mg-Zn-Gd alloy of multimodal microstructure, Acta Materialia, 82, pp.198-211, 2015.
  • Hagihara, K., Yamasaki, M., Honnami, M., Izuno, H., Tane, M., Nakano, T., Kawamura, Y., Crystallographic nature of deformation bands shown in Zn and Mg-based long-period stacking ordered (LPSO) phase, Philosophical Magazine, 95 (2), pp.132-157, 2015.
  • Hagihara, K., Honnami, M., Matsumoto, R., Fukusumi, Y., Izuno, H., Yamasaki, M., Okamoto, T., Nakano, T., Kawamura, Y., In-situ observation on the formation behavior of the deformation kink bands in Zn single crystal and LPSO phase, Materials Transactions, 56 (7), pp.943-951, 2015.
  • Tane, M., Kimizuka, H., Hagihara, K., Suzuki, S., Mayama, T., Sekino, T., Nagai, Y., Effects of stacking sequence and short-range ordering of solute atoms on elastic properties of Mg-Zn-Y alloys with longperiod stacking ordered structures, Acta Materialia, 96, pp. 170-188, 2015.
  • Tane, M., Mayama, T., Oda, A., Nakajima, H., Effect of crystallographic texture on mechanical properties in porous magnesium with oriented cylindrical pores, Acta Materialia, 84, pp. 80-94, 2015.
  • Shiraishi, K., Mayama, T., Yamasaki, M., Kawamura, Y., Influence of long period stacking ordered phase on non-uniform deformation in cast Mg-Zn-Y alloys, Materials Science Forum, 816, pp. 481-485, 2015.
  • Mayama, T., Ohashi, T., Tadano, Y., Hagihara, K., Crystal plasticity analysis of development of intragranular misorientations due to kinking in HCP single crystals subjected to uniaxial compressive loading, Materials Transactions, 56 (7), pp. 963-972, 2015.
  • Mine, Y., Maezono, R., Oda, H., Yamasaki, M., Kawamura, Y., Takashima, K., Deformation behavior of long-period stacking ordered structured single crystals in Mg85Zn6Y9 alloy, Materials Transactions, 56 (7), pp. 952-956, 2015.
  • Mine, Y., Haraguchi, D., Horita, Z., Takashima, K., High-pressure torsion of metastable austenitic stainless steel at moderate temperatures, Philosophical Magazine Letters, 95 (5), pp. 269-276, 2015.
  • Pissuwan, D., Niidome, T., Polyelectrolyte-coated gold nanorods and their biomedical applications, Nanoscale, 7 (1), pp. 59-65, 2015.
  • Haine, A.T., Niidome, T., Drug delivery systems controlled by irradiation of near infrared light, Journal of Photopolymer Science and Technology, 28 (5), pp. 705-710, 2015.
  • Niidome, T., Fujii, M., Nakashima, N., Katayama, Y., Niidome, Y., Imaging mass spectrometry of gold nanorods distributed in tumor tissues, Chemistry Letters, 44 (7), pp. 931-933, 2015.
  • Sueta, D., Hokimoto, S., Miyazaki, T., Sakamoto, K., Tsujita, K., Yamamoto, E., Tabata, N., Kojima, S., Kaikita, K., Ogawa, H., Usefulness of excimer laser atherectomy for balloon uncrossable lesion in chronic total occlusion, IJC Heart and Vasculature, 9, pp. 70-72, 2015.
  • Kusaka, H., Yamamoto, E., Hirata, Y., Fujisue, K., Tokitsu, T., Sugamura, K., Sakamoto, K., Tsujita, K., Kaikita, K., Hokimoto, S., Sugiyama, S., Ogawa, H., Clinical significance of plasma galectin-3 in patients with coronary artery disease, International Journal of Cardiology, 201, pp. 532-534, 2015.
  • Yoshimura, H., Kaikita, K., Ono, T., Iwashita, S., Nakayama, N., Sato, K., Horio, E., Tsujita, K., Kojima, S., Tayama, S., Hokimoto, S., Ogawa, H., Lack of association between peri-procedural myocardial damage and CYP2C19 gene variant in elective percutaneous coronary intervention, Heart and Vessels, 30 (5), pp. 572-579, 2015.
  • Sueta, D., Yamamoto, E., Hirata, Y., Tokitsu, T., Sakamoto, K., Tsujita, K., Kaikita, K., Hokimoto, S., Sakanashi, T., Ogawa, H., Novel vascular indices evaluated non-invasively in end-stage renal disease patients on hemodialysis, Clinical Trials and Regulatory Science in Cardiology, 9, pp. 1-3, 2015.
  • Sueta, D., Hokimoto, S., Hirayama, R., Suzuki, R., Ogawa, H., A case of spontaneous and simultaneous dissections of both common iliac arteries in a young patient, Clinical Trials and Regulatory Science in Cardiology, 9, pp. 4-5, 2015.
  • Sueta, D., Kaikita, K., Okamoto, N., Arima, Y., Ishii, M., Ito, M., Oimatsu, Y., Iwashita, S., Takahashi, A., Nakamura, E., Hokimoto, S., Mizuta, H., Ogawa, H., A novel quantitative assessment of whole blood thrombogenicity in patients treated with a non-vitamin K oral anticoagulant, International Journal of Cardiology, 197, art. no. 20697, pp. 98-100, 2015.
  • Yamamoto, E., Hirata, Y., Tokitsu, T., Kusaka, H., Sakamoto, K., Yamamuro, M., Kaikita, K., Watanabe, H., Hokimoto, S., Sugiyama, S., Maruyama, T., Ogawa, H., The pivotal role of eNOS uncoupling in vascular endothelial dysfunction in patients with heart failure with preserved ejection fraction, International Journal of Cardiology, 190 (1), pp. 335-337, 2015.
  • Tokitsu, T., Yamamoto, E., Hirata, Y., Fujisue, K., Sueta, D., Sugamura, K., Sakamoto, K., Kaikita, K., Hokimoto, S., Sugiyama, S., Ogawa, H., Clinical significance of pulse pressure in patients with coronary artery disease, International Journal of Cardiology, 190 (1), pp. 299-301, 2015.

2014

  • Okuda, H., Horiuchi, T., Yamasaki, M., Kawamura, Y., Kohara, S., In situ measurements on stability of long-period stacking-ordered structures in Mg85Y9Zn6 alloys during heating examined by multicolor synchrotron radiation small-angle scattering, Scripta Materialia, 75, pp. 66-69, 2014.
  • Padhy, G.K., Terasaki, H., Komizo, Y.-I., Hydrogen distribution and hydrogen cracking susceptibility of a martensitic-austenitic steel welding wire, Materials Letters, 136, pp.22-25, 2014.
  • Terasaki, H., Shintome, Y., Takada, A., Komizo, Y.-I., Moriguchi, K., Tomio, Y., Visualization and analysis of variant grouping in continuously cooled low-carbon steel welds, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45(8), pp. 3554-3559, 2014.
  • Morito, S., Yoshida, S., Hayamizu, R., Hayashi, T., Ohba, T., Terasaki, H., Komizo, Y.-I., Three-dimensional approach to observing growth of blocks and packets in Fe-18Ni maraging steel, Advanced Materials Research, 783-786, pp. 916-919, 2014.
  • Matsuda, M., Yamashita, K., Tsurekawa, S., Takashima, K., Nishida, M., Ductility enhancement in Co-Fe-Ni alloys by microstructural control, Intermetallics, 52, pp. 124-130, 2014.
  • Fujisawa, T., Hamada, S., Koga, N., Sasaki, D., Tsuchiyama, T., Nakada, N., Takashima, K., Ueda, M., Noguchi, H., Proposal for an engineering definition of a fatigue crack initiation unit for evaluating the fatigue limit on the basis of crystallographic analysis of pearlitic steel, International Journal of Fracture, 185 (1-2), pp. 17-29, 2014.
  • Otsu, M., Yasunaga, M., Matsuda, M., Takashima, K., Friction stir incremental forming of A2017 aluminum sheets, Procedia Engineering, 81, pp. 2318-2323, 2014.
  • Matsuda, M., Yamashita, R., Tsurekawa, S., Takashima, K., Mitsuhara, M., Nishida, M., Antiphase boundary-like structure of B19′ martensite via R-phase transformation in Ti-Ni-Fe alloy, Journal of Alloys and Compounds, 586, pp. 87-93, 2014.
  • Kitahara, H., Yada, T., Hashiguchi, F., Tsushida, M., Ando, S., Mg alloy sheets with a nanocrystalline surface layer fabricated by wire-brushing, Surface and Coatings Technology, 243, pp. 28-33, 2014.
  • Kitahara, H., Maruno, F., Tsushida, M., Ando, S., Deformation behavior of Mg single crystals during a single ECAP pass at room temperature, Materials Science and Engineering A, 590, pp. 274-280, 2014.
  • Ando, S., Kodera, A., Fukushima, K., Tsushida, M., Kitahara, H., Tensile deformation of magnesium and magnesium alloy single crystals, Advanced Materials Research, 783-786, pp. 341-345, 2014.
  • Ando, S., Kodera, A., Fukushima, K., Tsushida, M., Kitahara, H., Tensile deformation of magnesium and magnesium alloy single crystals, Materials Science Forum, 783-786, pp. 341-345, 2014.
  • Kitahara, H., Mayama, T., Okumura, K., Tadano, Y., Tsushida, M., Ando, S., Anisotropic deformation induced by spherical indentation of pure Mg single crystals, Acta Materialia, 78, pp. 290-300, 2014.
  • Hama, T., Mayama, T., Takuda, H., Deformation Behavior of a Magnesium Alloy Sheet with random crystallographic orientations, Key Engineering Materials, 611-612, pp. 27-32, 2014.
  • Mine, Y., Takashima, H., Matsuda, M., Takashima, K., Microtension behaviour of lenticular martensite structure of Fe-30mass% Ni alloy, Materials Science and Engineering A, 618, pp. 359-367, 2014.
  • Kim, J., Weldability of Cu54Zr22Ti18Ni6 bulk metallic glass by ultrasonic welding processing, Materials Letters, 130, pp. 160-163, 2014.
  • Toita, R., Kang, J.-H., Kim, C.W., Shiosaki, S., Mori, T., Niidome, T., Katayama, Y., Effect of peptide content on the regulation of transgene expression by protein kinase Cα-responsive linear polyethyleniminepeptide conjugates, Colloids and Surfaces B: Biointerfaces, 123, pp. 123-129, 2014.
  • Niidome, T., Yamauchi, H., Takahashi, K., Naoyama, K., Watanabe, K., Mori, T., Katayama, Y., Hydrophobic cavity formed by oligopeptide for doxorubicin delivery based on dendritic poly(L-lysine), Journal of Biomaterials Science, Polymer Edition, 25 (13), pp. 1362-1373, 2014.
  • Niidome, T., Gokuden, R., Watanabe, K., Mori, T., Naganuma, T., Utsumi, H., Ichikawa, K., Katayama, Y., Nitroxyl radicals-modified dendritic poly(l -lysine) as a contrast agent for Overhauser-enhanced MRI, Journal of Biomaterials Science, Polymer Edition, 25 (13), pp. 1425-1439, 2014.
  • Nobori, T., Shiosaki, S., Mori, T., Toita, R., Kim, C.W., Nakamura, Y., Kishimura, A., Niidome, T., Katayama, Y., Fluorescent polyion complex nanoparticle that incorporates an internal standard for quantitative analysis of protein kinase activity, Bioconjugate Chemistry, 25 (5), pp. 869-872, 2014.
  • Niidome, T., Chijiiwa, N., Yamasaki, T., Yamada, K.-I., Mori, T., Naganuma, T., Utsumi, H., Ichikawa, K., Katayama, Y., Change in overhauser effect-enhanced MRI signal in response to uPA highly expressing in tumor, Chemistry Letters, 43 (7), pp. 999-1001, 2014.

2013

  • Terasaki, H., Komizo, Y.-I., Correlation between the microstructural development of bainitic ferrite and the characteristics of martensite-austenite constituent, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (12), pp. 5289-5293, 2013.
  • Terasaki, H., Komizo, Y.-I., Morphology and crystallography of bainite transformation in a single prior-austenite grain of low-carbon steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (6), pp. 2683-2689, 2013.
  • Matsuda, M., Iwamoto, Y., Morizono, Y., Tsurekawa, S., Takashima, K., Nishida, M., Enhancement of ductility in B2-type Zr-Co-Ni alloys with deformation-induced martensite and microcrack formation, Intermetallics, 36, pp. 45-50, 2013.
  • Takamatsu, Y., Tsushida, M., Kitahara, H., Ando, S., Investigation of micro-deformation behavior in pure magnesium and magnesium alloy single crystals using indentation test, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, 3, pp. 1606-1610, 2013.
  • Kodera, A., Yagi, T., Tsushida, M., Kitahara, H., Ando, S., Deformation behavior of Mg-Al-Zn alloy single crystals, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, 3, pp. 1574-1579, 2013.
  • Ando, S., Kodera, A., Yagi, T., Tsushida, M., Kitahara, H., Alloying effects on non-basal slips in magnesium single crystals, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, 2, pp. 1449-1454, 2013.
  • Kitahara, H., Matsushita, S., Tsushida, M., Ando, S., Effect of ARB processing on fatigue crack closure in commercially pure titanium, Materials Transactions, 54 (4), pp. 528-531, 2013.
  • Yamasaki, M., Matsushita, M., Hagihara, K., Izuno, H., Abe, E., Kawamura, Y., Highly ordered 10H-type long-period stacking order phase in a Mg-Zn-Y ternary alloy, Scripta Materialia, 78-79, pp. 13-16, 2014.
    ・Jono, Y., Yamasaki, M., Kawamura, Y., Effect of LPSO phase-stimulated texture evolution on creep resistance of extruded Mg-Zn-Gd alloys, Materials Transactions, 54 (5), pp. 703-712, 2013.
  • Yamasaki, M., Kato, Z., Akiyama, E., Habazaki, H., The use of renewable energy in the form of methane via electrolytic hydrogen generation, Archives of Metallurgy and Materials, 58 (1), pp. 231-239, 2013.
  • Yamasaki, M., Hagihara, K., Inoue, S.-I., Hadorn, J.P., Kawamura, Y., Crystallographic classification of kink bands in an extruded Mg-Zn-Y alloy using intragranular misorientation axis analysis, Acta Materialia, 61 (6), pp. 2065-2076, 2013.
  • Mine, Y., Yoshimura, H., Matsuda, M., Takashima, K., Kawamura, Y., Microfracture behaviour of extruded Mg-Zn-Y alloys containing long-period stacking ordered structure at room and elevated temperatures, Materials Science and Engineering A, 570, pp. 63-69, 2013.
  • Mine, Y., Hirashita, K., Takashima, H., Matsuda, M., Takashima, K., Micro-tension behaviour of lath martensite structures of carbon steel, Materials Science and Engineering A, 560, pp. 535-544, 2013.
  • Kim, J., Kawamura, Y., Influence of Rare Earth Elements on Microstructure and Mechanical Properties of Mg97Zn1Y1RE1 Alloys, Materials Science and Engineering A, 573, pp. 62-66, 2013.
  • Hadorn, J.P., Yamasaki, M., Kim, J., Kawamura, Y., Characterization of an al-y-zn intermetallic particle phase in extruded Mg96-xAlxZn2Y1.9La0.1 alloys, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (6), pp. 2839-2848, 2013.
  • Kim, J., Kawamura, Y., Effect of the extrusion conditions on the microstructure and mechanical properties of indirect extruded Mg-Zn-Y alloy with LPSO phase, Magnesium Technology, pp. 217-219, 2013.

Posted by ||業績リスト はコメントを受け付けていません。

Comments are closed.